aws_direct_connect_virtual_interface – Manage Direct Connect virtual interfaces¶

New in version 2.5.

Synopsis
Requirements
Parameters
Notes
Examples
Return Values
Status

Synopsis ¶

Create, delete, or modify a Direct Connect public or private virtual interface.

Requirements ¶

The below requirements are needed on the host that executes this module.

boto
boto3
botocore
python >= 2.6

Parameters ¶

Parameter	Choices/Defaults	Comments
address_type -		The type of IP address for the BGP peer.
amazon_address -		The amazon address CIDR with which to create the virtual interface.
authentication_key -		The authentication key for BGP configuration.
aws_access_key string		AWS access key. If not set then the value of the AWS_ACCESS_KEY_ID, AWS_ACCESS_KEY or EC2_ACCESS_KEY environment variable is used. aliases: ec2_access_key, access_key
aws_secret_key string		AWS secret key. If not set then the value of the AWS_SECRET_ACCESS_KEY, AWS_SECRET_KEY, or EC2_SECRET_KEY environment variable is used. aliases: ec2_secret_key, secret_key
bgp_asn -	Default: 65000	The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration.
cidr -		A list of route filter prefix CIDRs with which to create the public virtual interface.
customer_address -		The customer address CIDR with which to create the virtual interface.
debug_botocore_endpoint_logs boolean added in 2.8	Choices: no ← yes	Use a botocore.endpoint logger to parse the unique (rather than total) "resource:action" API calls made during a task, outputing the set to the resource_actions key in the task results. Use the aws_resource_action callback to output to total list made during a playbook. The ANSIBLE_DEBUG_BOTOCORE_LOGS environment variable may also be used.
ec2_url string		Url to use to connect to EC2 or your Eucalyptus cloud (by default the module will use EC2 endpoints). Ignored for modules where region is required. Must be specified for all other modules if region is not used. If not set then the value of the EC2_URL environment variable, if any, is used.
id_to_associate -		The ID of the link aggregation group or connection to associate with the virtual interface. aliases: link_aggregation_group_id, connection_id
name -		The name of the virtual interface.
profile string		Uses a boto profile. Only works with boto >= 2.24.0.
public boolean	Choices: no yes	The type of virtual interface.
region string		The AWS region to use. If not specified then the value of the AWS_REGION or EC2_REGION environment variable, if any, is used. See http://docs.aws.amazon.com/general/latest/gr/rande.html#ec2_region aliases: aws_region, ec2_region
security_token string		AWS STS security token. If not set then the value of the AWS_SECURITY_TOKEN or EC2_SECURITY_TOKEN environment variable is used. aliases: access_token
state -	Choices: present absent	The desired state of the Direct Connect virtual interface.
validate_certs boolean	Choices: no yes ←	When set to "no", SSL certificates will not be validated for boto versions >= 2.6.0.
virtual_gateway_id -		The virtual gateway ID required for creating a private virtual interface.
virtual_interface_id -		The virtual interface ID.
vlan -	Default: 100	The VLAN ID.

Notes ¶

Note

If parameters are not set within the module, the following environment variables can be used in decreasing order of precedence AWS_URL or EC2_URL, AWS_ACCESS_KEY_ID or AWS_ACCESS_KEY or EC2_ACCESS_KEY, AWS_SECRET_ACCESS_KEY or AWS_SECRET_KEY or EC2_SECRET_KEY, AWS_SECURITY_TOKEN or EC2_SECURITY_TOKEN, AWS_REGION or EC2_REGION
Ansible uses the boto configuration file (typically ~/.boto) if no credentials are provided. See https://boto.readthedocs.io/en/latest/boto_config_tut.html
AWS_REGION or EC2_REGION can be typically be used to specify the AWS region, when required, but this can also be configured in the boto config file

Examples ¶

---
- name: create an association between a LAG and connection
  aws_direct_connect_virtual_interface:
    state: present
    name: "{{ name }}"
    link_aggregation_group_id: LAG-XXXXXXXX
    connection_id: dxcon-XXXXXXXX

- name: remove an association between a connection and virtual interface
  aws_direct_connect_virtual_interface:
    state: absent
    connection_id: dxcon-XXXXXXXX
    virtual_interface_id: dxv-XXXXXXXX

Return Values ¶

Common return values are documented here, the following are the fields unique to this module:

Key		Returned	Description
address_family string		always	The address family for the BGP peer. Sample: ipv4
amazon_address string		always	IP address assigned to the Amazon interface. Sample: 169.254.255.1/30
asn integer		always	The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration. Sample: 65000
auth_key string		always	The authentication key for BGP configuration. Sample: 0xZ59Y1JZ2oDOSh6YriIlyRE
bgp_peers complex		always	A list of the BGP peers configured on this virtual interface.
	address_family string	always	The address family for the BGP peer. Sample: ipv4
	amazon_address string	always	IP address assigned to the Amazon interface. Sample: 169.254.255.1/30
	asn integer	always	The autonomous system (AS) number for Border Gateway Protocol (BGP) configuration. Sample: 65000
	auth_key string	always	The authentication key for BGP configuration. Sample: 0xZ59Y1JZ2oDOSh6YriIlyRE
	bgp_peer_state string	always	The state of the BGP peer (verifying, pending, available) Sample: available
	bgp_status string	always	The up/down state of the BGP peer. Sample: up
	customer_address string	always	IP address assigned to the customer interface. Sample: 169.254.255.2/30
changed boolean		always	Indicated if the virtual interface has been created/modified/deleted
connection_id string		always	The ID of the connection. This field is also used as the ID type for operations that use multiple connection types (LAG, interconnect, and/or connection). Sample: dxcon-fgb175av
customer_address string		always	IP address assigned to the customer interface. Sample: 169.254.255.2/30
customer_router_config string		always	Information for generating the customer router configuration.
location string		always	Where the connection is located. Sample: EqDC2
owner_account string		always	The AWS account that will own the new virtual interface. Sample: 123456789012
route_filter_prefixes complex		always	A list of routes to be advertised to the AWS network in this region (public virtual interface).
	cidr string	always	A routes to be advertised to the AWS network in this region. Sample: 54.227.92.216/30
virtual_gateway_id string		when public=False	The ID of the virtual private gateway to a VPC. This only applies to private virtual interfaces. Sample: vgw-f3ce259a
virtual_interface_id string		always	The ID of the virtual interface. Sample: dxvif-fh0w7cex
virtual_interface_name string		always	The name of the virtual interface assigned by the customer. Sample: test_virtual_interface
virtual_interface_state string		always	State of the virtual interface (confirming, verifying, pending, available, down, rejected). Sample: available
virtual_interface_type string		always	The type of virtual interface (private, public). Sample: private
vlan integer		always	The VLAN ID. Sample: 100

Status ¶

This module is not guaranteed to have a backwards compatible interface. [preview]
This module is maintained by the Ansible Community. [community]

Authors¶

Sloane Hertel (@s-hertel)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.

aws_direct_connect_virtual_interface – Manage Direct Connect virtual interfaces¶

Synopsis¶

Requirements¶

Parameters¶

Notes¶

Examples¶

Return Values¶

Status¶