bigip_apm_network_access – Manage APM Network Access resource

New in version 2.9.

Synopsis

  • Manage APM Network Access resource.

Parameters

Parameter Choices/Defaults Comments
allow_local_dns
boolean
    Choices:
  • no
  • yes
Enables local access to DNS servers configured on client prior to establishing network access connection.
allow_local_subnet
boolean
    Choices:
  • no
  • yes
Enables local subnet access and local access to any host or subnet in routes specified in the client routing table.
When yes the system does not support integrated IP filtering.
description
string
User created network access description.
dns_address_space
list
Specifies a list of domain names describing the target LAN DNS addresses.
dtls
boolean
    Choices:
  • no
  • yes
When yes the network access connection uses Datagram Transport Level Security instead of TCP, to provide better throughput for high demand applications like VoIP or streaming video.
dtls_port
integer
Specifies the port number that the network access resource uses for secure UDP traffic with DTLS.
excluded_dns_addresses
list
Specifies the DNS address spaces for which traffic is not forced through the tunnel.
excluded_ipv4_adresses
list
Specifies IPV4 address spaces for which traffic is not forced through the tunnel.
subnet
string
The address of subnet in CIDR format, e.g. 192.168.1.0/24
Host addresses can be specified without the CIDR mask notation.
excluded_ipv6_adresses
list
Specifies IPV6 address spaces for which traffic is not forced through the tunnel.
subnet
string
The address of subnet in CIDR format, e.g. 2001:db8:abcd:8000::/52
Host addresses can be specified without the CIDR mask notation.
ip_version
string
    Choices:
  • ipv4
  • ipv4-ipv6
Supported IP version on the network access resource.
ipv4_address_space
list
Specifies a list of IPv4 hosts or networks describing the target LAN.
This option is mandatory when creating a new resource and split_tunnel is set to yes.
subnet
string
The address of subnet in CIDR format, e.g. 192.168.1.0/24
Host addresses can be specified without the CIDR mask notation.
ipv4_lease_pool
string
Specifies IPV4 lease pool resource to use with network access.
Referencing lease pool can be done in the full path format for example, /Common/pool_name.
When lease pool is referenced in full path format, the partition parameter is ignored.
ipv6_address_space
list
Specifies a list of IPv6 hosts or networks describing the target LAN.
This option is mandatory when creating a new resource and split_tunnel is set to yes.
subnet
string
The address of subnet in CIDR format, e.g. 2001:db8:abcd:8000::/52
Host addresses can be specified without the CIDR mask notation.
ipv6_lease_pool
string
Specifies IPV6 lease pool resource to use with network access.
Referencing lease pool can be done in the full path format for example, /Common/pool_name.
When lease pool is referenced in full path format, the partition parameter is ignored.
name
string / required
Specifies the name of the APM network access to manage/create.
partition
string
Default:
"Common"
Device partition to manage resources on.
provider
dictionary
added in 2.5
A dict object containing connection details.
auth_provider
string
Configures the auth provider for to obtain authentication tokens from the remote device.
This option is really used when working with BIG-IQ devices.
password
string / required
The password for the user account used to connect to the BIG-IP.
You may omit this option by setting the environment variable F5_PASSWORD.

aliases: pass, pwd
server
string / required
The BIG-IP host.
You may omit this option by setting the environment variable F5_SERVER.
server_port
integer
Default:
443
The BIG-IP server port.
You may omit this option by setting the environment variable F5_SERVER_PORT.
ssh_keyfile
path
Specifies the SSH keyfile to use to authenticate the connection to the remote device. This argument is only used for cli transports.
You may omit this option by setting the environment variable ANSIBLE_NET_SSH_KEYFILE.
timeout
integer
Specifies the timeout in seconds for communicating with the network device for either connecting or sending commands. If the timeout is exceeded before the operation is completed, the module will error.
transport
string
    Choices:
  • cli
  • rest ←
Configures the transport connection to use when connecting to the remote device.
user
string / required
The username to connect to the BIG-IP with. This user must have administrative privileges on the device.
You may omit this option by setting the environment variable F5_USER.
validate_certs
boolean
    Choices:
  • no
  • yes ←
If no, SSL certificates are not validated. Use this only on personally controlled sites using self-signed certificates.
You may omit this option by setting the environment variable F5_VALIDATE_CERTS.
snat_pool
string
Specifies the name of a SNAT pool used for implementing selective and intelligent SNATs.
When none the system uses no SNAT pool for this network resource.
When automap the system uses all of the self IP addresses as the translation addresses for the pool.
split_tunnel
boolean
    Choices:
  • no
  • yes
Specifies that only the traffic targeted to a specified address space is sent over the network access tunnel.
state
string
    Choices:
  • present ←
  • absent
When state is present, ensures that the ACL exists.
When state is absent, ensures that the ACL is removed.

Notes

Note

  • For more information on using Ansible to manage F5 Networks devices see https://www.ansible.com/integrations/networks/f5.
  • Requires BIG-IP software version >= 12.
  • The F5 modules only manipulate the running configuration of the F5 product. To ensure that BIG-IP specific configuration persists to disk, be sure to include at least one task that uses the bigip_config module to save the running configuration. Refer to the module’s documentation for the correct usage of the module to save your running configuration.

Examples

- name: Create a split tunnel IPV4 Network Access
  bigip_apm_network_access:
    name: foobar
    ip_version: ipv4
    split_tunnel: yes
    snat_pool: "none"
    ipv4_lease_pool: leasefoo
    ipv4_address_space:
      - subnet: 10.10.1.1
      - subnet: 10.10.2.0/24
    excluded_ipv4_adresses:
      - subnet: 192.168.1.0/24
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Modify a split tunnel IPV4 Network Access
  bigip_apm_network_access:
    name: foobar
    snat_pool: /Common/poolsnat
    ipv4_address_space:
      - subnet: 172.16.23.0/24
    excluded_ipv4_adresses:
      - subnet: 10.10.2.0/24
    allow_local_subnet: yes
    allow_local_dns: yes
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

- name: Remove Network Access
  bigip_apm_network_access:
    name: foobar
    state: absent
    provider:
      password: secret
      server: lb.mydomain.com
      user: admin
  delegate_to: localhost

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
allow_local_dns
boolean
changed
Enables local access to DNS servers configured on client.

Sample:
True
allow_local_subnet
boolean
changed
Enables local subnet access.

Sample:
True
description
string
changed
The new description of Network Access.

Sample:
My Access
dns_address_space
list
changed
Specifies a list of domain names describing the target LAN DNS addresses.

Sample:
['internal.net', '*.engnet.org']
dtls
boolean
changed
Enables use of DTLS by network access.

dtls_port
integer
changed
Specifies the port number that the network access resource uses for DTLS.

Sample:
4433
excluded_dns_addresses
list
changed
Specifies the DNS address spaces for which traffic is not forced through the tunnel.

Sample:
['foobar.com', 'bazbar.org']
excluded_ipv4_adresses
complex
changed
Specifies IPV4 address spaces for which traffic is not forced through the tunnel.

Sample:
hash/dictionary of values
 
subnet
string
changed
The host or network address.

Sample:
192.168.10.1
excluded_ipv6_adresses
complex
changed
Specifies IPV6 address spaces for which traffic is not forced through the tunnel.

Sample:
hash/dictionary of values
 
subnet
string
changed
The host or network address.

Sample:
2001:DB8:ABCD:0012::0
ip_version
string
changed
Supported IP version on the network access resource.

Sample:
ipv4-ipv6
ipv4_address_space
complex
changed
Specifies a list of IPv4 hosts or networks describing the target LAN.

Sample:
hash/dictionary of values
 
subnet
string
changed
The host or network address.

Sample:
192.168.10.1
ipv4_lease_pool
string
changed
Specifies IPV4 lease pool resource to use with network access.

Sample:
/Common/leasepoolv4
ipv6_address_space
complex
changed
Specifies a list of IPv6 hosts or networks describing the target LAN.

Sample:
hash/dictionary of values
 
subnet
string
changed
The host or network address.

Sample:
2001:DB8:ABCD:0012::0
ipv6_lease_pool
string
changed
Specifies IPV6 lease pool resource to use with network access.

Sample:
/Common/leasepoolv6
snat_pool
string
changed
The name of a SNAT pool used by network access resource.

Sample:
/Common/my-pool
split_tunnel
boolean
changed
Enables split tunnel on network access resource.

Sample:
True


Status

Authors

  • Wojciech Wypior (@wojtek0806)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.