fortios_user_radius – Configure RADIUS server entries in Fortinet’s FortiOS and FortiGate

New in version 2.8.

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify user feature and radius category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.5

Requirements

The below requirements are needed on the host that executes this module.

  • fortiosapi>=0.9.8

Parameters

Parameter Choices/Defaults Comments
host
string
FortiOS or FortiGate IP address.
https
boolean
    Choices:
  • no
  • yes ←
Indicates if the requests towards FortiGate must use HTTPS protocol.
password
string
Default:
""
FortiOS or FortiGate password.
ssl_verify
boolean
added in 2.9
    Choices:
  • no
  • yes ←
Ensures FortiGate certificate must be verified by a proper CA.
state
string
added in 2.9
    Choices:
  • present
  • absent
Indicates whether to create or remove the object. This attribute was present already in previous version in a deeper level. It has been moved out to this outer level.
user_radius
dictionary
Default:
null
Configure RADIUS server entries.
accounting_server
list
Additional accounting servers.
id
integer / required
ID (0 - 4294967295).
port
integer
RADIUS accounting port number.
secret
string
Secret key.
server
string
name_str or ip_str Server CN domain name or IP.
source_ip
string
Source IP address for communications to the RADIUS server.
status
string
    Choices:
  • enable
  • disable
Status.
acct_all_servers
string
    Choices:
  • enable
  • disable
Enable/disable sending of accounting messages to all configured servers.
acct_interim_interval
integer
Time in seconds between each accounting interim update message.
all_usergroup
string
    Choices:
  • disable
  • enable
Enable/disable automatically including this RADIUS server in all user groups.
auth_type
string
    Choices:
  • auto
  • ms_chap_v2
  • ms_chap
  • chap
  • pap
Authentication methods/protocols permitted for this RADIUS server.
class
list
Class attribute name(s).
name
string / required
Class name.
h3c_compatibility
string
    Choices:
  • enable
  • disable
Enable/disable compatibility with the H3C, a mechanism that performs security checking for authentication.
name
string / required
RADIUS server entry name.
nas_ip
string
IP address used to communicate with the RADIUS server and used as NAS-IP-Address and Called-Station-ID attributes.
password_encoding
string
    Choices:
  • auto
  • ISO-8859-1
Password encoding.
password_renewal
string
    Choices:
  • enable
  • disable
Enable/disable password renewal.
radius_coa
string
    Choices:
  • enable
  • disable
Enable to allow a mechanism to change the attributes of an authentication, authorization, and accounting session after it is authenticated.
radius_port
integer
RADIUS service port number.
rsso
string
    Choices:
  • enable
  • disable
Enable/disable RADIUS based single sign on feature.
rsso_context_timeout
integer
Time in seconds before the logged out user is removed from the "user context list" of logged on users.
rsso_endpoint_attribute
string
    Choices:
  • User-Name
  • NAS-IP-Address
  • Framed-IP-Address
  • Framed-IP-Netmask
  • Filter-Id
  • Login-IP-Host
  • Reply-Message
  • Callback-Number
  • Callback-Id
  • Framed-Route
  • Framed-IPX-Network
  • Class
  • Called-Station-Id
  • Calling-Station-Id
  • NAS-Identifier
  • Proxy-State
  • Login-LAT-Service
  • Login-LAT-Node
  • Login-LAT-Group
  • Framed-AppleTalk-Zone
  • Acct-Session-Id
  • Acct-Multi-Session-Id
RADIUS attributes used to extract the user end point identifier from the RADIUS Start record.
rsso_endpoint_block_attribute
string
    Choices:
  • User-Name
  • NAS-IP-Address
  • Framed-IP-Address
  • Framed-IP-Netmask
  • Filter-Id
  • Login-IP-Host
  • Reply-Message
  • Callback-Number
  • Callback-Id
  • Framed-Route
  • Framed-IPX-Network
  • Class
  • Called-Station-Id
  • Calling-Station-Id
  • NAS-Identifier
  • Proxy-State
  • Login-LAT-Service
  • Login-LAT-Node
  • Login-LAT-Group
  • Framed-AppleTalk-Zone
  • Acct-Session-Id
  • Acct-Multi-Session-Id
RADIUS attributes used to block a user.
rsso_ep_one_ip_only
string
    Choices:
  • enable
  • disable
Enable/disable the replacement of old IP addresses with new ones for the same endpoint on RADIUS accounting Start messages.
rsso_flush_ip_session
string
    Choices:
  • enable
  • disable
Enable/disable flushing user IP sessions on RADIUS accounting Stop messages.
rsso_log_flags
string
    Choices:
  • protocol-error
  • profile-missing
  • accounting-stop-missed
  • accounting-event
  • endpoint-block
  • radiusd-other
  • none
Events to log.
rsso_log_period
integer
Time interval in seconds that group event log messages will be generated for dynamic profile events.
rsso_radius_response
string
    Choices:
  • enable
  • disable
Enable/disable sending RADIUS response packets after receiving Start and Stop records.
rsso_radius_server_port
integer
UDP port to listen on for RADIUS Start and Stop records.
rsso_secret
string
RADIUS secret used by the RADIUS accounting server.
rsso_validate_request_secret
string
    Choices:
  • enable
  • disable
Enable/disable validating the RADIUS request shared secret in the Start or End record.
secondary_secret
string
Secret key to access the secondary server.
secondary_server
string
name_str or ip_str secondary RADIUS CN domain name or IP.
secret
string
Pre-shared secret key used to access the primary RADIUS server.
server
string
Primary RADIUS server CN domain name or IP address.
source_ip
string
Source IP address for communications to the RADIUS server.
sso_attribute
string
    Choices:
  • User-Name
  • NAS-IP-Address
  • Framed-IP-Address
  • Framed-IP-Netmask
  • Filter-Id
  • Login-IP-Host
  • Reply-Message
  • Callback-Number
  • Callback-Id
  • Framed-Route
  • Framed-IPX-Network
  • Class
  • Called-Station-Id
  • Calling-Station-Id
  • NAS-Identifier
  • Proxy-State
  • Login-LAT-Service
  • Login-LAT-Node
  • Login-LAT-Group
  • Framed-AppleTalk-Zone
  • Acct-Session-Id
  • Acct-Multi-Session-Id
RADIUS attribute that contains the profile group name to be extracted from the RADIUS Start record.
sso_attribute_key
string
Key prefix for SSO group value in the SSO attribute.
sso_attribute_value_override
string
    Choices:
  • enable
  • disable
Enable/disable override old attribute value with new value for the same endpoint.
state
string
    Choices:
  • present
  • absent
Deprecated
Starting with Ansible 2.9 we recommend using the top-level 'state' parameter.

Indicates whether to create or remove the object.
tertiary_secret
string
Secret key to access the tertiary server.
tertiary_server
string
name_str or ip_str tertiary RADIUS CN domain name or IP.
timeout
integer
Time in seconds between re-sending authentication requests.
use_management_vdom
string
    Choices:
  • enable
  • disable
Enable/disable using management VDOM to send requests.
username_case_sensitive
string
    Choices:
  • enable
  • disable
Enable/disable case sensitive user names.
username
string
FortiOS or FortiGate username.
vdom
string
Default:
"root"
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.

Notes

Note

  • Requires fortiosapi library developed by Fortinet
  • Run as a local_action in your playbook

Examples

- hosts: localhost
  vars:
   host: "192.168.122.40"
   username: "admin"
   password: ""
   vdom: "root"
   ssl_verify: "False"
  tasks:
  - name: Configure RADIUS server entries.
    fortios_user_radius:
      host:  "{{ host }}"
      username: "{{ username }}"
      password: "{{ password }}"
      vdom:  "{{ vdom }}"
      https: "False"
      state: "present"
      user_radius:
        accounting_server:
         -
            id:  "4"
            port: "5"
            secret: "<your_own_value>"
            server: "192.168.100.40"
            source_ip: "84.230.14.43"
            status: "enable"
        acct_all_servers: "enable"
        acct_interim_interval: "11"
        all_usergroup: "disable"
        auth_type: "auto"
        class:
         -
            name: "default_name_15"
        h3c_compatibility: "enable"
        name: "default_name_17"
        nas_ip: "<your_own_value>"
        password_encoding: "auto"
        password_renewal: "enable"
        radius_coa: "enable"
        radius_port: "22"
        rsso: "enable"
        rsso_context_timeout: "24"
        rsso_endpoint_attribute: "User-Name"
        rsso_endpoint_block_attribute: "User-Name"
        rsso_ep_one_ip_only: "enable"
        rsso_flush_ip_session: "enable"
        rsso_log_flags: "protocol-error"
        rsso_log_period: "30"
        rsso_radius_response: "enable"
        rsso_radius_server_port: "32"
        rsso_secret: "<your_own_value>"
        rsso_validate_request_secret: "enable"
        secondary_secret: "<your_own_value>"
        secondary_server: "<your_own_value>"
        secret: "<your_own_value>"
        server: "192.168.100.40"
        source_ip: "84.230.14.43"
        sso_attribute: "User-Name"
        sso_attribute_key: "<your_own_value>"
        sso_attribute_value_override: "enable"
        tertiary_secret: "<your_own_value>"
        tertiary_server: "<your_own_value>"
        timeout: "45"
        use_management_vdom: "enable"
        username_case_sensitive: "enable"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
build
string
always
Build number of the fortigate image

Sample:
1547
http_method
string
always
Last method used to provision the content into FortiGate

Sample:
PUT
http_status
string
always
Last result given by FortiGate on last operation applied

Sample:
200
mkey
string
success
Master key (id) used in the last call to FortiGate

Sample:
id
name
string
always
Name of the table used to fulfill the request

Sample:
urlfilter
path
string
always
Path of the table used to fulfill the request

Sample:
webfilter
revision
string
always
Internal revision number

Sample:
17.0.2.10658
serial
string
always
Serial number of the unit

Sample:
FGVMEVYYQT3AB5352
status
string
always
Indication of the operation's result

Sample:
success
vdom
string
always
Virtual domain used

Sample:
root
version
string
always
Version of the FortiGate

Sample:
v5.6.3


Status

Authors

  • Miguel Angel Munoz (@mamunozgonzalez)
  • Nicolas Thomas (@thomnico)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.