fortios_vpn_ipsec_phase2_interface – Configure VPN autokey tunnel in Fortinet’s FortiOS and FortiGate

New in version 2.8.

Synopsis

  • This module is able to configure a FortiGate or FortiOS (FOS) device by allowing the user to set and modify vpn_ipsec feature and phase2_interface category. Examples include all parameters and values need to be adjusted to datasources before usage. Tested with FOS v6.0.5

Requirements

The below requirements are needed on the host that executes this module.

  • fortiosapi>=0.9.8

Parameters

Parameter Choices/Defaults Comments
host
string
FortiOS or FortiGate IP address.
https
boolean
    Choices:
  • no
  • yes ←
Indicates if the requests towards FortiGate must use HTTPS protocol.
password
string
Default:
""
FortiOS or FortiGate password.
ssl_verify
boolean
added in 2.9
    Choices:
  • no
  • yes ←
Ensures FortiGate certificate must be verified by a proper CA.
state
string
added in 2.9
    Choices:
  • present
  • absent
Indicates whether to create or remove the object. This attribute was present already in previous version in a deeper level. It has been moved out to this outer level.
username
string
FortiOS or FortiGate username.
vdom
string
Default:
"root"
Virtual domain, among those defined previously. A vdom is a virtual instance of the FortiGate that can be configured and used as a different unit.
vpn_ipsec_phase2_interface
dictionary
Default:
null
Configure VPN autokey tunnel.
add_route
string
    Choices:
  • phase1
  • enable
  • disable
Enable/disable automatic route addition.
auto_discovery_forwarder
string
    Choices:
  • phase1
  • enable
  • disable
Enable/disable forwarding short-cut messages.
auto_discovery_sender
string
    Choices:
  • phase1
  • enable
  • disable
Enable/disable sending short-cut messages.
auto_negotiate
string
    Choices:
  • enable
  • disable
Enable/disable IPsec SA auto-negotiation.
comments
string
Comment.
dhcp_ipsec
string
    Choices:
  • enable
  • disable
Enable/disable DHCP-IPsec.
dhgrp
string
    Choices:
  • 1
  • 2
  • 5
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 27
  • 28
  • 29
  • 30
  • 31
Phase2 DH group.
dst_addr_type
string
    Choices:
  • subnet
  • range
  • ip
  • name
  • subnet6
  • range6
  • ip6
  • name6
Remote proxy ID type.
dst_end_ip
string
Remote proxy ID IPv4 end.
dst_end_ip6
string
Remote proxy ID IPv6 end.
dst_name
string
Remote proxy ID name. Source firewall.address.name firewall.addrgrp.name.
dst_name6
string
Remote proxy ID name. Source firewall.address6.name firewall.addrgrp6.name.
dst_port
integer
Quick mode destination port (1 - 65535 or 0 for all).
dst_start_ip
string
Remote proxy ID IPv4 start.
dst_start_ip6
string
Remote proxy ID IPv6 start.
dst_subnet
string
Remote proxy ID IPv4 subnet.
dst_subnet6
string
Remote proxy ID IPv6 subnet.
encapsulation
string
    Choices:
  • tunnel-mode
  • transport-mode
ESP encapsulation mode.
keepalive
string
    Choices:
  • enable
  • disable
Enable/disable keep alive.
keylife_type
string
    Choices:
  • seconds
  • kbs
  • both
Keylife type.
keylifekbs
integer
Phase2 key life in number of bytes of traffic (5120 - 4294967295).
keylifeseconds
integer
Phase2 key life in time in seconds (120 - 172800).
l2tp
string
    Choices:
  • enable
  • disable
Enable/disable L2TP over IPsec.
name
string / required
IPsec tunnel name.
pfs
string
    Choices:
  • enable
  • disable
Enable/disable PFS feature.
phase1name
string
Phase 1 determines the options required for phase 2. Source vpn.ipsec.phase1-interface.name.
proposal
string
    Choices:
  • null-md5
  • null-sha1
  • null-sha256
  • null-sha384
  • null-sha512
  • des-null
  • des-md5
  • des-sha1
  • des-sha256
  • des-sha384
  • des-sha512
Phase2 proposal.
protocol
integer
Quick mode protocol selector (1 - 255 or 0 for all).
replay
string
    Choices:
  • enable
  • disable
Enable/disable replay detection.
route_overlap
string
    Choices:
  • use-old
  • use-new
  • allow
Action for overlapping routes.
single_source
string
    Choices:
  • enable
  • disable
Enable/disable single source IP restriction.
src_addr_type
string
    Choices:
  • subnet
  • range
  • ip
  • name
  • subnet6
  • range6
  • ip6
  • name6
Local proxy ID type.
src_end_ip
string
Local proxy ID end.
src_end_ip6
string
Local proxy ID IPv6 end.
src_name
string
Local proxy ID name. Source firewall.address.name firewall.addrgrp.name.
src_name6
string
Local proxy ID name. Source firewall.address6.name firewall.addrgrp6.name.
src_port
integer
Quick mode source port (1 - 65535 or 0 for all).
src_start_ip
string
Local proxy ID start.
src_start_ip6
string
Local proxy ID IPv6 start.
src_subnet
string
Local proxy ID subnet.
src_subnet6
string
Local proxy ID IPv6 subnet.
state
string
    Choices:
  • present
  • absent
Deprecated
Starting with Ansible 2.9 we recommend using the top-level 'state' parameter.

Indicates whether to create or remove the object.

Notes

Note

  • Requires fortiosapi library developed by Fortinet
  • Run as a local_action in your playbook

Examples

- hosts: localhost
  vars:
   host: "192.168.122.40"
   username: "admin"
   password: ""
   vdom: "root"
   ssl_verify: "False"
  tasks:
  - name: Configure VPN autokey tunnel.
    fortios_vpn_ipsec_phase2_interface:
      host:  "{{ host }}"
      username: "{{ username }}"
      password: "{{ password }}"
      vdom:  "{{ vdom }}"
      https: "False"
      state: "present"
      vpn_ipsec_phase2_interface:
        add_route: "phase1"
        auto_discovery_forwarder: "phase1"
        auto_discovery_sender: "phase1"
        auto_negotiate: "enable"
        comments: "<your_own_value>"
        dhcp_ipsec: "enable"
        dhgrp: "1"
        dst_addr_type: "subnet"
        dst_end_ip: "<your_own_value>"
        dst_end_ip6: "<your_own_value>"
        dst_name: "<your_own_value> (source firewall.address.name firewall.addrgrp.name)"
        dst_name6: "<your_own_value> (source firewall.address6.name firewall.addrgrp6.name)"
        dst_port: "15"
        dst_start_ip: "<your_own_value>"
        dst_start_ip6: "<your_own_value>"
        dst_subnet: "<your_own_value>"
        dst_subnet6: "<your_own_value>"
        encapsulation: "tunnel-mode"
        keepalive: "enable"
        keylife_type: "seconds"
        keylifekbs: "23"
        keylifeseconds: "24"
        l2tp: "enable"
        name: "default_name_26"
        pfs: "enable"
        phase1name: "<your_own_value> (source vpn.ipsec.phase1-interface.name)"
        proposal: "null-md5"
        protocol: "30"
        replay: "enable"
        route_overlap: "use-old"
        single_source: "enable"
        src_addr_type: "subnet"
        src_end_ip: "<your_own_value>"
        src_end_ip6: "<your_own_value>"
        src_name: "<your_own_value> (source firewall.address.name firewall.addrgrp.name)"
        src_name6: "<your_own_value> (source firewall.address6.name firewall.addrgrp6.name)"
        src_port: "39"
        src_start_ip: "<your_own_value>"
        src_start_ip6: "<your_own_value>"
        src_subnet: "<your_own_value>"
        src_subnet6: "<your_own_value>"

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
build
string
always
Build number of the fortigate image

Sample:
1547
http_method
string
always
Last method used to provision the content into FortiGate

Sample:
PUT
http_status
string
always
Last result given by FortiGate on last operation applied

Sample:
200
mkey
string
success
Master key (id) used in the last call to FortiGate

Sample:
id
name
string
always
Name of the table used to fulfill the request

Sample:
urlfilter
path
string
always
Path of the table used to fulfill the request

Sample:
webfilter
revision
string
always
Internal revision number

Sample:
17.0.2.10658
serial
string
always
Serial number of the unit

Sample:
FGVMEVYYQT3AB5352
status
string
always
Indication of the operation's result

Sample:
success
vdom
string
always
Virtual domain used

Sample:
root
version
string
always
Version of the FortiGate

Sample:
v5.6.3


Status

Authors

  • Miguel Angel Munoz (@mamunozgonzalez)
  • Nicolas Thomas (@thomnico)

Hint

If you notice any issues in this documentation, you can edit this document to improve it.