na_ontap_firmware_upgrade – NetApp ONTAP firmware upgrade for SP, shelf, ACP, and disk¶
New in version 2.9.
Requirements¶
The below requirements are needed on the host that executes this module.
- A physical or virtual clustered Data ONTAP system. The modules support Data ONTAP 9.1 and onward
- Ansible 2.6
- Python2 netapp-lib (2017.10.30) or later. Install using ‘pip install netapp-lib’
- Python3 netapp-lib (2018.11.13) or later. Install using ‘pip install netapp-lib’
- To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’
Parameters¶
Parameter | Choices/Defaults | Comments |
---|---|---|
clear_logs
boolean
|
|
Clear logs on the device after update. Default value is true
|
disk_fw
string
|
disk firmware to be updated to.
|
|
firmware_type
string
|
|
Type of firmware to be upgraded. Options include shelf, ACP, service-processor, and disk.
For shelf firmware upgrade the operation is asynchronous, and therefore returns no errors that might occur during the download process.
Shelf firmware upgrade is idempotent if shelf_module_fw is provided .
disk firmware upgrade is idempotent if disk_fw is provided .
With check mode, SP, ACP, disk, and shelf firmware upgrade is not idempotent.
This operation will only update firmware on shelves/disk that do not have the latest firmware-revision.
|
hostname
string
/ required
|
The hostname or IP address of the ONTAP instance.
|
|
http_port
integer
|
Override the default port (80 or 443) with this port
|
|
https
boolean
|
|
Enable and disable https
|
install_baseline_image
boolean
|
|
Install the version packaged with ONTAP if this parameter is set to true. Otherwise, package must be used to specify the package to install.
|
node
string
/ required
|
Node on which the device is located.
|
|
ontapi
integer
|
The ontap api version to use
|
|
package
string
|
Name of the package file containing the firmware to be installed. Not required when -baseline is true.
|
|
password
string
/ required
|
Password for the specified user.
aliases: pass |
|
shelf_module_fw
string
|
Shelf module firmware to be updated to.
|
|
state
string
|
Default: "present"
|
Whether the specified ONTAP firmware should be upgraded or not.
|
update_type
string
|
Type of firmware update to be performed. Options include serial_full, serial_differential, network_full.
|
|
use_rest
string
|
|
REST API if supported by the target system for all the resources and attributes the module requires. Otherwise will revert to ZAPI.
Always -- will always use the REST API
Never -- will always use the ZAPI
Auto -- will try to use the REST Api
|
username
string
/ required
|
This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required. For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/.
aliases: user |
|
validate_certs
boolean
|
|
If set to
no , the SSL certificates will not be validated.This should only set to
False used on personally controlled sites using self-signed certificates. |
Examples¶
- name: SP firmware upgrade
na_ontap_firmware_upgrade:
state: present
node: vsim1
package: "{{ file name }}"
clear_logs: True
install_baseline_image: False
update_type: serial_full
firmware_type: service-processor
hostname: "{{ netapp_hostname }}"
username: "{{ netapp_username }}"
password: "{{ netapp_password }}"
- name: ACP firmware upgrade
na_ontap_firmware_upgrade:
state: present
node: vsim1
firmware_type: acp
hostname: "{{ netapp_hostname }}"
username: "{{ netapp_username }}"
password: "{{ netapp_password }}"
- name: shelf firmware upgrade
na_ontap_firmware_upgrade:
state: present
firmware_type: shelf
shelf_module_fw: 1221
hostname: "{{ netapp_hostname }}"
username: "{{ netapp_username }}"
password: "{{ netapp_password }}"
- name: disk firmware upgrade
na_ontap_firmware_upgrade:
state: present
firmware_type: disk
disk_fw: NA02
hostname: "{{ netapp_hostname }}"
username: "{{ netapp_username }}"
password: "{{ netapp_password }}"
Status¶
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by the Ansible Community. [community]
Authors¶
- NetApp Ansible Team (@carchi8py) <ng-ansibleteam@netapp.com>
Hint
If you notice any issues in this documentation, you can edit this document to improve it.