na_ontap_net_subnet – NetApp ONTAP Create, delete, modify network subnets

New in version 2.8.

Synopsis

  • Create, modify, destroy the network subnet

Requirements

The below requirements are needed on the host that executes this module.

  • A physical or virtual clustered Data ONTAP system. The modules support Data ONTAP 9.1 and onward
  • Ansible 2.6
  • Python2 netapp-lib (2017.10.30) or later. Install using ‘pip install netapp-lib’
  • Python3 netapp-lib (2018.11.13) or later. Install using ‘pip install netapp-lib’
  • To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’

Parameters

Parameter Choices/Defaults Comments
broadcast_domain
- / required
Specify the required broadcast_domain name for the subnet.
A broadcast domain can not be modified after the subnet has been created
from_name
-
Name of the subnet to be renamed
gateway
-
Specify the gateway for the default route of the subnet.
hostname
string / required
The hostname or IP address of the ONTAP instance.
http_port
integer
Override the default port (80 or 443) with this port
https
boolean
    Choices:
  • no ←
  • yes
Enable and disable https
ip_ranges
-
Specify the list of IP address ranges associated with the subnet.
ipspace
-
Specify the ipspace for the subnet.
The default value for this parameter is the default IPspace, named 'Default'.
name
- / required
Specify the subnet name.
ontapi
integer
The ontap api version to use
password
string / required
Password for the specified user.

aliases: pass
state
-
    Choices:
  • present ←
  • absent
Whether the specified network interface group should exist or not.
subnet
- / required
Specify the subnet (ip and mask).
use_rest
string
    Choices:
  • Never
  • Always
  • Auto ←
REST API if supported by the target system for all the resources and attributes the module requires. Otherwise will revert to ZAPI.
Always -- will always use the REST API
Never -- will always use the ZAPI
Auto -- will try to use the REST Api
username
string / required
This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required. For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/.

aliases: user
validate_certs
boolean
    Choices:
  • no
  • yes ←
If set to no, the SSL certificates will not be validated.
This should only set to False used on personally controlled sites using self-signed certificates.

Notes

Note

  • The modules prefixed with na\_ontap are built to support the ONTAP storage platform.

Examples

- name: create subnet
  na_ontap_net_subnet:
    state: present
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
    hostname: "{{ netapp_hostname }}"
    subnet: 10.10.10.0/24
    name: subnet-adm
    ip_ranges: [ '10.10.10.30-10.10.10.40', '10.10.10.51' ]
    gateway: 10.10.10.254
    ipspace: Default
    broadcast_domain: Default
- name: delete subnet
  na_ontap_net_subnet:
    state: absent
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
    hostname: "{{ netapp_hostname }}"
    name: subnet-adm
    ipspace: Default
- name: rename subnet
  na_ontap_net_subnet:
    state: present
    username: "{{ netapp_username }}"
    password: "{{ netapp_password }}"
    hostname: "{{ netapp_hostname }}"
    name: subnet-adm-new
    from_name: subnet-adm
    ipspace: Default

Status

Authors

Hint

If you notice any issues in this documentation, you can edit this document to improve it.