na_ontap_volume_autosize – NetApp ONTAP manage volume autosize

New in version 2.9.

Synopsis

  • Modify Volume AutoSize

Requirements

The below requirements are needed on the host that executes this module.

  • A physical or virtual clustered Data ONTAP system. The modules support Data ONTAP 9.1 and onward
  • Ansible 2.6
  • Python2 netapp-lib (2017.10.30) or later. Install using ‘pip install netapp-lib’
  • Python3 netapp-lib (2018.11.13) or later. Install using ‘pip install netapp-lib’
  • To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’

Parameters

Parameter Choices/Defaults Comments
grow_threshold_percent
integer
Specifies the percentage of the flexible volume's capacity at which autogrow is initiated.
The default grow threshold varies from 85% to 98%, depending on the volume size.
It is an error for the grow threshold to be less than or equal to the shrink threshold.
Range between 0 and 100
hostname
string / required
The hostname or IP address of the ONTAP instance.
http_port
integer
Override the default port (80 or 443) with this port
https
boolean
    Choices:
  • no ←
  • yes
Enable and disable https
increment_size
string
Specify the flexible volume's increment size using the following format < number > [k|m|g|t]
The amount is the absolute size to set.
The trailing 'k', 'm', 'g', and 't' indicates the desired units, namely 'kilobytes', 'megabytes', 'gigabytes', and 'terabytes' (respectively).
maximum_size
string
Specify the flexible volume's maximum allowed size using the following format < number > [k|m|g|t]
The amount is the absolute size to set.
The trailing 'k', 'm', 'g', and 't' indicates the desired units, namely 'kilobytes', 'megabytes', 'gigabytes', and 'terabytes' (respectively).
The default value is 20% greater than the volume size at the time autosize was enabled.
It is an error for the maximum volume size to be less than the current volume size.
It is also an error for the maximum size to be less than or equal to the minimum size.
minimum_size
string
Specify the flexible volume's minimum allowed size using the following format < number > [k|m|g|t] The amount is the absolute size to set.
The trailing 'k', 'm', 'g', and 't' indicates the desired units, namely 'kilobytes', 'megabytes', 'gigabytes', and 'terabytes' (respectively).
The default value is the size of the volume at the time the 'grow_shrink' mode was enabled.
It is an error for the minimum size to be greater than or equal to the maximum size.
mode
string
    Choices:
  • grow
  • grow_shrink
  • off
Specify the flexible volume's autosize mode of operation.
ontapi
integer
The ontap api version to use
password
string / required
Password for the specified user.

aliases: pass
reset
boolean
    Choices:
  • no
  • yes
Sets the values of maximum_size, increment_size, minimum_size, grow_threshold_percent, shrink_threshold_percent and mode to their defaults
shrink_threshold_percent
integer
Specifies the percentage of the flexible volume's capacity at which autoshrink is initiated.
The default shrink threshold is 50%. It is an error for the shrink threshold to be greater than or equal to the grow threshold.
Range between 0 and 100
use_rest
string
    Choices:
  • Never
  • Always
  • Auto ←
REST API if supported by the target system for all the resources and attributes the module requires. Otherwise will revert to ZAPI.
Always -- will always use the REST API
Never -- will always use the ZAPI
Auto -- will try to use the REST Api
username
string / required
This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required. For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/.

aliases: user
validate_certs
boolean
    Choices:
  • no
  • yes ←
If set to no, the SSL certificates will not be validated.
This should only set to False used on personally controlled sites using self-signed certificates.
volume
string / required
The name of the flexible volume for which we want to set autosize.
vserver
string / required
Name of the vserver to use.

Notes

Note

  • The modules prefixed with na\_ontap are built to support the ONTAP storage platform.

Examples

- name: Modify volume autosize
  na_ontap_volume_autosize:
    hostname: 10.193.79.189
    username: admin
    password: netapp1!
    volume: ansibleVolumesize12
    mode: grow
    grow_threshold_percent: 99
    increment_size: 50m
    maximum_size: 10g
    minimum_size: 21m
    shrink_threshold_percent: 40
    vserver: ansible_vserver

- name: Reset volume autosize
  na_ontap_volume_autosize:
    hostname: 10.193.79.189
    username: admin
    password: netapp1!
    volume: ansibleVolumesize12
    reset: true
    vserver: ansible_vserver

Status

Authors

Hint

If you notice any issues in this documentation, you can edit this document to improve it.