na_ontap_volume – NetApp ONTAP manage volumes¶
New in version 2.6.
Requirements¶
The below requirements are needed on the host that executes this module.
- A physical or virtual clustered Data ONTAP system. The modules support Data ONTAP 9.1 and onward
- Ansible 2.6
- Python2 netapp-lib (2017.10.30) or later. Install using ‘pip install netapp-lib’
- Python3 netapp-lib (2018.11.13) or later. Install using ‘pip install netapp-lib’
- To enable http on the cluster you must run the following commands ‘set -privilege advanced;’ ‘system services web modify -http-enabled true;’
Parameters¶
Parameter | Choices/Defaults | Comments |
---|---|---|
aggr_list
list
added in 2.8 |
an array of names of aggregates to be used for FlexGroup constituents.
|
|
aggr_list_multiplier
integer
added in 2.8 |
The number of times to iterate over the aggregates listed with the aggr_list parameter when creating a FlexGroup.
|
|
aggregate_name
string
|
The name of the aggregate the flexvol should exist on.
Required when
state=present . |
|
atime_update
boolean
added in 2.8 |
|
This is an advanced option, the default is True.
If false, prevent the update of inode access times when a file is read.
This value is useful for volumes with extremely high read traffic, since it prevents writes to the inode file for the volume from contending with reads from other files.
This field should be used carefully.
That is, use this field when you know in advance that the correct access time for inodes will not be needed for files on that volume.
|
auto_provision_as
string
added in 2.8 |
|
Automatically provision a FlexGroup volume.
|
comment
string
added in 2.9 |
Sets a comment associated with the volume.
|
|
efficiency_policy
string
added in 2.7 |
Allows a storage efficiency policy to be set on volume creation.
|
|
encrypt
boolean
added in 2.7 |
|
Whether or not to enable Volume Encryption.
|
from_name
string
added in 2.7 |
Name of the existing volume to be renamed to name.
|
|
hostname
string
/ required
|
The hostname or IP address of the ONTAP instance.
|
|
http_port
integer
|
Override the default port (80 or 443) with this port
|
|
https
boolean
|
|
Enable and disable https
|
is_infinite
boolean
|
|
Set True if the volume is an Infinite Volume. Deleting an infinite volume is asynchronous.
|
is_online
boolean
|
|
Whether the specified volume is online, or not.
|
junction_path
string
|
Junction path of the volume.
To unmount, use junction path
'' . |
|
language
string
added in 2.8 |
Language to use for Volume
Default uses SVM language
Possible values Language
c POSIX
ar Arabic
cs Czech
da Danish
de German
en English
en_us English (US)
es Spanish
fi Finnish
fr French
he Hebrew
hr Croatian
hu Hungarian
it Italian
ja Japanese euc-j
ja_v1 Japanese euc-j
ja_jp.pck Japanese PCK (sjis)
ja_jp.932 Japanese cp932
ja_jp.pck_v2 Japanese PCK (sjis)
ko Korean
no Norwegian
nl Dutch
pl Polish
pt Portuguese
ro Romanian
ru Russian
sk Slovak
sl Slovenian
sv Swedish
tr Turkish
zh Simplified Chinese
zh.gbk Simplified Chinese (GBK)
zh_tw Traditional Chinese euc-tw
zh_tw.big5 Traditional Chinese Big 5
To use UTF-8 as the NFS character set, append '.UTF-8' to the language code
|
|
name
string
/ required
|
The name of the volume to manage.
|
|
nvfail_enabled
boolean
added in 2.9 |
|
If true, the controller performs additional work at boot and takeover times if it finds that there has been any potential data loss in the volume's constituents due to an NVRAM failure.
The volume's constituents would be put in a special state called 'in-nvfailed-state' such that protocol access is blocked.
This will cause the client applications to crash and thus prevent access to stale data.
To get out of this situation, the admin needs to manually clear the 'in-nvfailed-state' on the volume's constituents.
|
ontapi
integer
|
The ontap api version to use
|
|
password
string
/ required
|
Password for the specified user.
aliases: pass |
|
percent_snapshot_space
integer
|
Amount of space reserved for snapshot copies of the volume.
|
|
policy
string
|
Name of the export policy.
|
|
qos_adaptive_policy_group
-
added in 2.9 |
Specifies a QoS adaptive policy group to be set on volume.
|
|
qos_policy_group
-
added in 2.9 |
Specifies a QoS policy group to be set on volume.
|
|
size
integer
|
The size of the volume in (size_unit). Required when
state=present . |
|
size_unit
string
|
|
The unit used to interpret the size parameter.
|
snapdir_access
boolean
added in 2.8 |
|
This is an advanced option, the default is False.
Enable the visible '.snapshot' directory that is normally present at system internal mount points.
This value also turns on access to all other '.snapshot' directories in the volume.
|
snapshot_policy
string
added in 2.8 |
The name of the snapshot policy.
the default policy name is 'default'.
|
|
space_guarantee
string
|
|
Space guarantee style for the volume.
|
space_slo
string
added in 2.9 |
|
Specifies the space SLO type for the volume. The space SLO type is the Service Level Objective for space management for the volume.
The space SLO value is used to enforce existing volume settings so that sufficient space is set aside on the aggregate to meet the space SLO.
This parameter is not supported on Infinite Volumes.
|
state
-
|
|
Whether the specified volume should exist or not.
|
tiering_policy
string
added in 2.9 |
|
The tiering policy that is to be associated with the volume.
This policy decides whether the blocks of a volume will be tiered to the capacity tier.
snapshot-only policy allows tiering of only the volume snapshot copies not associated with the active file system.
auto policy allows tiering of both snapshot and active file system user data to the capacity tier.
backup policy on DP volumes allows all transferred user data blocks to start in the capacity tier.
When set to none, the Volume blocks will not be tiered to the capacity tier.
If no value specified, the volume is assigned snapshot only by default.
|
time_out
integer
added in 2.8 |
Default: 180
|
time to wait for flexGroup creation, modification, or deletion in seconds.
Error out if task is not completed in defined time.
if 0, the request is asynchronous.
default is set to 3 minutes.
|
type
string
|
The volume type, either read-write (RW) or data-protection (DP).
|
|
unix_permissions
string
added in 2.8 |
Unix permission bits in octal or symbolic format.
For example, 0 is equivalent to ------------, 777 is equivalent to ---rwxrwxrwx,both formats are accepted.
The valid octal value ranges between 0 and 777 inclusive.
|
|
use_rest
string
|
|
REST API if supported by the target system for all the resources and attributes the module requires. Otherwise will revert to ZAPI.
Always -- will always use the REST API
Never -- will always use the ZAPI
Auto -- will try to use the REST Api
|
username
string
/ required
|
This can be a Cluster-scoped or SVM-scoped account, depending on whether a Cluster-level or SVM-level API is required. For more information, please read the documentation https://mysupport.netapp.com/NOW/download/software/nmsdk/9.4/.
aliases: user |
|
validate_certs
boolean
|
|
If set to
no , the SSL certificates will not be validated.This should only set to
False used on personally controlled sites using self-signed certificates. |
volume_security_style
string
|
|
The security style associated with this volume.
|
vserver
string
/ required
|
Name of the vserver to use.
|
|
vserver_dr_protection
string
added in 2.9 |
|
Specifies the protection type for the volume in a Vserver DR setup.
|
wait_for_completion
boolean
added in 2.8 |
|
Set this parameter to 'true' for synchronous execution during create (wait until volume status is online)
Set this parameter to 'false' for asynchronous execution
For asynchronous, execution exits as soon as the request is sent, without checking volume status
|
Examples¶
- name: Create FlexVol
na_ontap_volume:
state: present
name: ansibleVolume12
is_infinite: False
aggregate_name: ansible_aggr
size: 100
size_unit: mb
space_guarantee: none
tiering_policy: auto
policy: default
percent_snapshot_space: 60
qos_policy_group: max_performance_gold
vserver: ansibleVServer
wait_for_completion: True
space_slo: none
nvfail_enabled: False
comment: ansible created volume
hostname: "{{ netapp_hostname }}"
username: "{{ netapp_username }}"
password: "{{ netapp_password }}"
- name: Volume Delete
na_ontap_volume:
state: absent
name: ansibleVolume12
aggregate_name: ansible_aggr
vserver: ansibleVServer
hostname: "{{ netapp_hostname }}"
username: "{{ netapp_username }}"
password: "{{ netapp_password }}"
- name: Make FlexVol offline
na_ontap_volume:
state: present
name: ansibleVolume
is_infinite: False
is_online: False
vserver: ansibleVServer
hostname: "{{ netapp_hostname }}"
username: "{{ netapp_username }}"
password: "{{ netapp_password }}"
- name: Create flexGroup volume manually
na_ontap_volume:
state: present
name: ansibleVolume
is_infinite: False
aggr_list: "{{ aggr_list }}"
aggr_list_multiplier: 2
size: 200
size_unit: mb
space_guarantee: none
policy: default
vserver: "{{ vserver }}"
hostname: "{{ netapp_hostname }}"
username: "{{ netapp_username }}"
password: "{{ netapp_password }}"
https: False
unix_permissions: 777
snapshot_policy: default
time_out: 0
- name: Create flexGroup volume auto provision as flex group
na_ontap_volume:
state: present
name: ansibleVolume
is_infinite: False
auto_provision_as: flexgroup
size: 200
size_unit: mb
space_guarantee: none
policy: default
vserver: "{{ vserver }}"
hostname: "{{ netapp_hostname }}"
username: "{{ netapp_username }}"
password: "{{ netapp_password }}"
https: False
unix_permissions: 777
snapshot_policy: default
time_out: 0
- name: Create FlexVol with QoS adaptive
na_ontap_volume:
state: present
name: ansibleVolume15
is_infinite: False
aggregate_name: ansible_aggr
size: 100
size_unit: gb
space_guarantee: none
policy: default
percent_snapshot_space: 10
qos_adaptive_policy_group: extreme
vserver: ansibleVServer
wait_for_completion: True
hostname: "{{ netapp_hostname }}"
username: "{{ netapp_username }}"
password: "{{ netapp_password }}"
- name: Modify volume dr protection (vserver of the volume must be in a snapmirror relationship)
na_ontap_volume:
state: present
name: ansibleVolume
vserver_dr_protection: protected
vserver: "{{ vserver }}"
hostname: "{{ netapp_hostname }}"
username: "{{ netapp_username }}"
password: "{{ netapp_password }}"
https: False
Status¶
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by an Ansible Partner. [certified]
Authors¶
- NetApp Ansible Team (@carchi8py) <ng-ansibleteam@netapp.com>
Hint
If you notice any issues in this documentation, you can edit this document to improve it.