openssl_certificate – Generate and/or check OpenSSL certificates¶
New in version 2.4.
Synopsis¶
- This module allows one to (re)generate OpenSSL certificates.
- It implements a notion of provider (ie.
selfsigned
,ownca
,acme
,assertonly
,entrust
) for your certificate. - The
assertonly
provider is intended for use cases where one is only interested in checking properties of a supplied certificate. Please note that this provider has been deprecated in Ansible 2.9 and will be removed in Ansible 2.13. See the examples on how to emulateassertonly
usage with openssl_certificate_info, openssl_csr_info, openssl_privatekey_info and assert. This also allows more flexible checks than the ones offered by theassertonly
provider. - The
ownca
provider is intended for generating OpenSSL certificate signed with your own CA (Certificate Authority) certificate (self-signed certificate). - Many properties that can be specified in this module are for validation of an existing or newly generated certificate. The proper place to specify them, if you want to receive a certificate with these properties is a CSR (Certificate Signing Request).
- Please note that the module regenerates existing certificate if it doesn’t match the module’s options, or if it seems to be corrupt. If you are concerned that this could overwrite your existing certificate, consider using the backup option.
- It uses the pyOpenSSL or cryptography python library to interact with OpenSSL.
- If both the cryptography and PyOpenSSL libraries are available (and meet the minimum version requirements) cryptography will be preferred as a backend over PyOpenSSL (unless the backend is forced with
select_crypto_backend
). Please note that the PyOpenSSL backend was deprecated in Ansible 2.9 and will be removed in Ansible 2.13.
Requirements¶
The below requirements are needed on the host that executes this module.
- PyOpenSSL >= 0.15 or cryptography >= 1.6 (if using
selfsigned
orassertonly
provider) - acme-tiny (if using the
acme
provider)
Parameters¶
Parameter | Choices/Defaults | Comments |
---|---|---|
acme_accountkey_path
path
|
The path to the accountkey for the
acme provider.This is only used by the
acme provider. |
|
acme_chain
boolean
added in 2.5 |
|
Include the intermediate certificate to the generated certificate
This is only used by the
acme provider.Note that this is only available for older versions of
acme-tiny . New versions include the chain automatically, and setting acme_chain to yes results in an error. |
acme_challenge_path
path
|
The path to the ACME challenge directory that is served on http://<HOST>:80/.well-known/acme-challenge/
This is only used by the
acme provider. |
|
attributes
string
|
The attributes the resulting file or directory should have.
To get supported flags look at the man page for chattr on the target system.
This string should contain the attributes in the same order as the one displayed by lsattr.
The
= operator is assumed as default, otherwise + or - operators need to be included in the string.aliases: attr |
|
backup
boolean
added in 2.8 |
|
Create a backup file including a timestamp so you can get the original certificate back if you overwrote it with a new one by accident.
This is not used by the
assertonly provider.This option is deprecated since Ansible 2.9 and will be removed with the
assertonly provider in Ansible 2.13. For alternatives, see the example on replacing assertonly . |
csr_path
path
|
Path to the Certificate Signing Request (CSR) used to generate this certificate.
This is not required in
assertonly mode. |
|
entrust_api_client_cert_key_path
path
added in 2.9 |
The path to the private key of the client certificate used to authenticate to the Entrust Certificate Services (ECS) API.
This is only used by the
entrust provider.This is required if the provider is
entrust . |
|
entrust_api_client_cert_path
path
added in 2.9 |
The path to the client certificate used to authenticate to the Entrust Certificate Services (ECS) API.
This is only used by the
entrust provider.This is required if the provider is
entrust . |
|
entrust_api_key
string
added in 2.9 |
The key (password) for authentication to the Entrust Certificate Services (ECS) API.
This is only used by the
entrust provider.This is required if the provider is
entrust . |
|
entrust_api_specification_path
path
added in 2.9 |
Default: "https://cloud.entrust.net/EntrustCloud/documentation/cms-api-2.1.0.yaml"
|
The path to the specification file defining the Entrust Certificate Services (ECS) API configuration.
You can use this to keep a local copy of the specification to avoid downloading it every time the module is used.
This is only used by the
entrust provider. |
entrust_api_user
string
added in 2.9 |
The username for authentication to the Entrust Certificate Services (ECS) API.
This is only used by the
entrust provider.This is required if the provider is
entrust . |
|
entrust_cert_type
string
added in 2.9 |
|
Specify the type of certificate requested.
This is only used by the
entrust provider. |
entrust_not_after
string
added in 2.9 |
Default: "+365d"
|
The point in time at which the certificate stops being valid.
Time can be specified either as relative time or as an absolute timestamp.
A valid absolute time format is
ASN.1 TIME such as 2019-06-18 .A valid relative time format is
[+-]timespec where timespec can be an integer + [w | d | h | m | s] , such as +365d or +32w1d2h ).Time will always be interpreted as UTC.
Note that only the date (day, month, year) is supported for specifying the expiry date of the issued certificate.
The full date-time is adjusted to EST (GMT -5:00) before issuance, which may result in a certificate with an expiration date one day earlier than expected if a relative time is used.
The minimum certificate lifetime is 90 days, and maximum is three years.
If this value is not specified, the certificate will stop being valid 365 days the date of issue.
This is only used by the
entrust provider. |
entrust_requester_email
string
added in 2.9 |
The email of the requester of the certificate (for tracking purposes).
This is only used by the
entrust provider.This is required if the provider is
entrust . |
|
entrust_requester_name
string
added in 2.9 |
The name of the requester of the certificate (for tracking purposes).
This is only used by the
entrust provider.This is required if the provider is
entrust . |
|
entrust_requester_phone
string
added in 2.9 |
The phone number of the requester of the certificate (for tracking purposes).
This is only used by the
entrust provider.This is required if the provider is
entrust . |
|
extended_key_usage
list
/ elements=string
|
The extended_key_usage extension field must contain all these values.
This is only used by the
assertonly provider.This option is deprecated since Ansible 2.9 and will be removed with the
assertonly provider in Ansible 2.13. For alternatives, see the example on replacing assertonly .aliases: extendedKeyUsage |
|
extended_key_usage_strict
boolean
|
|
If set to
yes , the extended_key_usage extension field must contain only these values.This is only used by the
assertonly provider.This option is deprecated since Ansible 2.9 and will be removed with the
assertonly provider in Ansible 2.13. For alternatives, see the example on replacing assertonly .aliases: extendedKeyUsage_strict |
force
boolean
|
|
Generate the certificate, even if it already exists.
|
group
string
|
Name of the group that should own the file/directory, as would be fed to chown.
|
|
has_expired
boolean
|
|
Checks if the certificate is expired/not expired at the time the module is executed.
This is only used by the
assertonly provider.This option is deprecated since Ansible 2.9 and will be removed with the
assertonly provider in Ansible 2.13. For alternatives, see the example on replacing assertonly . |
invalid_at
string
|
The certificate must be invalid at this point in time.
The timestamp is formatted as an ASN.1 TIME.
This is only used by the
assertonly provider.This option is deprecated since Ansible 2.9 and will be removed with the
assertonly provider in Ansible 2.13. For alternatives, see the example on replacing assertonly . |
|
issuer
dictionary
|
The key/value pairs that must be present in the issuer name field of the certificate.
If you need to specify more than one value with the same key, use a list as value.
This is only used by the
assertonly provider.This option is deprecated since Ansible 2.9 and will be removed with the
assertonly provider in Ansible 2.13. For alternatives, see the example on replacing assertonly . |
|
issuer_strict
boolean
added in 2.5 |
|
If set to
yes , the issuer field must contain only these values.This is only used by the
assertonly provider.This option is deprecated since Ansible 2.9 and will be removed with the
assertonly provider in Ansible 2.13. For alternatives, see the example on replacing assertonly . |
key_usage
list
/ elements=string
|
The key_usage extension field must contain all these values.
This is only used by the
assertonly provider.This option is deprecated since Ansible 2.9 and will be removed with the
assertonly provider in Ansible 2.13. For alternatives, see the example on replacing assertonly .aliases: keyUsage |
|
key_usage_strict
boolean
|
|
If set to
yes , the key_usage extension field must contain only these values.This is only used by the
assertonly provider.This option is deprecated since Ansible 2.9 and will be removed with the
assertonly provider in Ansible 2.13. For alternatives, see the example on replacing assertonly .aliases: keyUsage_strict |
mode
string
|
The permissions the resulting file or directory should have.
For those used to /usr/bin/chmod remember that modes are actually octal numbers. You must either add a leading zero so that Ansible's YAML parser knows it is an octal number (like
0644 or 01777 ) or quote it (like '644' or '1777' ) so Ansible receives a string and can do its own conversion from string into number.Giving Ansible a number without following one of these rules will end up with a decimal number which will have unexpected results.
As of Ansible 1.8, the mode may be specified as a symbolic mode (for example,
u+rwx or u=rw,g=r,o=r ).As of Ansible 2.6, the mode may also be the special string
preserve .When set to
preserve the file will be given the same permissions as the source file. |
|
not_after
string
|
The certificate must expire at this point in time.
The timestamp is formatted as an ASN.1 TIME.
This is only used by the
assertonly provider.This option is deprecated since Ansible 2.9 and will be removed with the
assertonly provider in Ansible 2.13. For alternatives, see the example on replacing assertonly .aliases: notAfter |
|
not_before
string
|
The certificate must start to become valid at this point in time.
The timestamp is formatted as an ASN.1 TIME.
This is only used by the
assertonly provider.This option is deprecated since Ansible 2.9 and will be removed with the
assertonly provider in Ansible 2.13. For alternatives, see the example on replacing assertonly .aliases: notBefore |
|
ownca_create_authority_key_identifier
boolean
added in 2.9 |
|
Create a Authority Key Identifier from the CA's certificate. If the CSR provided a authority key identifier, it is ignored.
The Authority Key Identifier is generated from the CA certificate's Subject Key Identifier, if available. If it is not available, the CA certificate's public key will be used.
This is only used by the
ownca provider.Note that this is only supported if the
cryptography backend is used! |
ownca_create_subject_key_identifier
string
added in 2.9 |
|
Whether to create the Subject Key Identifier (SKI) from the public key.
A value of
create_if_not_provided (default) only creates a SKI when the CSR does not provide one.A value of
always_create always creates a SKI. If the CSR provides one, that one is ignored.A value of
never_create never creates a SKI. If the CSR provides one, that one is used.This is only used by the
ownca provider.Note that this is only supported if the
cryptography backend is used! |
ownca_digest
string
added in 2.7 |
Default: "sha256"
|
The digest algorithm to be used for the
ownca certificate.This is only used by the
ownca provider. |
ownca_not_after
string
added in 2.7 |
Default: "+3650d"
|
The point in time at which the certificate stops being valid.
Time can be specified either as relative time or as absolute timestamp.
Time will always be interpreted as UTC.
Valid format is
[+-]timespec | ASN.1 TIME where timespec can be an integer + [w | d | h | m | s] (e.g. +32w1d2h .Note that if using relative time this module is NOT idempotent.
If this value is not specified, the certificate will stop being valid 10 years from now.
This is only used by the
ownca provider. |
ownca_not_before
string
added in 2.7 |
Default: "+0s"
|
The point in time the certificate is valid from.
Time can be specified either as relative time or as absolute timestamp.
Time will always be interpreted as UTC.
Valid format is
[+-]timespec | ASN.1 TIME where timespec can be an integer + [w | d | h | m | s] (e.g. +32w1d2h .Note that if using relative time this module is NOT idempotent.
If this value is not specified, the certificate will start being valid from now.
This is only used by the
ownca provider. |
ownca_path
path
added in 2.7 |
Remote absolute path of the CA (Certificate Authority) certificate.
This is only used by the
ownca provider. |
|
ownca_privatekey_passphrase
string
added in 2.7 |
The passphrase for the ownca_privatekey_path.
This is only used by the
ownca provider. |
|
ownca_privatekey_path
path
added in 2.7 |
Path to the CA (Certificate Authority) private key to use when signing the certificate.
This is only used by the
ownca provider. |
|
ownca_version
integer
added in 2.7 |
Default: 3
|
The version of the
ownca certificate.Nowadays it should almost always be
3 .This is only used by the
ownca provider. |
owner
string
|
Name of the user that should own the file/directory, as would be fed to chown.
|
|
path
path
/ required
|
Remote absolute path where the generated certificate file should be created or is already located.
|
|
privatekey_passphrase
string
|
The passphrase for the privatekey_path.
This is required if the private key is password protected.
|
|
privatekey_path
path
|
Path to the private key to use when signing the certificate.
|
|
provider
string
|
|
Name of the provider to use to generate/retrieve the OpenSSL certificate.
The
assertonly provider will not generate files and fail if the certificate file is missing.The
assertonly provider has been deprecated in Ansible 2.9 and will be removed in Ansible 2.13. Please see the examples on how to emulate it with openssl_certificate_info, openssl_csr_info, openssl_privatekey_info and assert.The
entrust provider was added for Ansible 2.9 and requires credentials for the https://www.entrustdatacard.com/products/categories/ssl-certificates (ECS) API.Required if state is
present . |
select_crypto_backend
string
added in 2.8 |
|
Determines which crypto backend to use.
The default choice is
auto , which tries to use cryptography if available, and falls back to pyopenssl .If set to
pyopenssl , will try to use the pyOpenSSL library.If set to
cryptography , will try to use the cryptography library.Please note that the
pyopenssl backend has been deprecated in Ansible 2.9, and will be removed in Ansible 2.13. From that point on, only the cryptography backend will be available. |
selevel
string
|
Default: "s0"
|
The level part of the SELinux file context.
This is the MLS/MCS attribute, sometimes known as the
range .When set to
_default , it will use the level portion of the policy if available. |
selfsigned_create_subject_key_identifier
string
added in 2.9 |
|
Whether to create the Subject Key Identifier (SKI) from the public key.
A value of
create_if_not_provided (default) only creates a SKI when the CSR does not provide one.A value of
always_create always creates a SKI. If the CSR provides one, that one is ignored.A value of
never_create never creates a SKI. If the CSR provides one, that one is used.This is only used by the
selfsigned provider.Note that this is only supported if the
cryptography backend is used! |
selfsigned_digest
string
|
Default: "sha256"
|
Digest algorithm to be used when self-signing the certificate.
This is only used by the
selfsigned provider. |
selfsigned_not_after
string
|
Default: "+3650d"
|
The point in time at which the certificate stops being valid.
Time can be specified either as relative time or as absolute timestamp.
Time will always be interpreted as UTC.
Valid format is
[+-]timespec | ASN.1 TIME where timespec can be an integer + [w | d | h | m | s] (e.g. +32w1d2h .Note that if using relative time this module is NOT idempotent.
If this value is not specified, the certificate will stop being valid 10 years from now.
This is only used by the
selfsigned provider.aliases: selfsigned_notAfter |
selfsigned_not_before
string
|
Default: "+0s"
|
The point in time the certificate is valid from.
Time can be specified either as relative time or as absolute timestamp.
Time will always be interpreted as UTC.
Valid format is
[+-]timespec | ASN.1 TIME where timespec can be an integer + [w | d | h | m | s] (e.g. +32w1d2h .Note that if using relative time this module is NOT idempotent.
If this value is not specified, the certificate will start being valid from now.
This is only used by the
selfsigned provider.aliases: selfsigned_notBefore |
selfsigned_version
integer
added in 2.5 |
Default: 3
|
Version of the
selfsigned certificate.Nowadays it should almost always be
3 .This is only used by the
selfsigned provider. |
serole
string
|
The role part of the SELinux file context.
When set to
_default , it will use the role portion of the policy if available. |
|
setype
string
|
The type part of the SELinux file context.
When set to
_default , it will use the type portion of the policy if available. |
|
seuser
string
|
The user part of the SELinux file context.
By default it uses the
system policy, where applicable.When set to
_default , it will use the user portion of the policy if available. |
|
signature_algorithms
list
/ elements=string
|
A list of algorithms that you would accept the certificate to be signed with (e.g. ['sha256WithRSAEncryption', 'sha512WithRSAEncryption']).
This is only used by the
assertonly provider.This option is deprecated since Ansible 2.9 and will be removed with the
assertonly provider in Ansible 2.13. For alternatives, see the example on replacing assertonly . |
|
state
string
|
|
Whether the certificate should exist or not, taking action if the state is different from what is stated.
|
subject
dictionary
|
The key/value pairs that must be present in the subject name field of the certificate.
If you need to specify more than one value with the same key, use a list as value.
This is only used by the
assertonly provider.This option is deprecated since Ansible 2.9 and will be removed with the
assertonly provider in Ansible 2.13. For alternatives, see the example on replacing assertonly . |
|
subject_alt_name
list
/ elements=string
|
The subject_alt_name extension field must contain these values.
This is only used by the
assertonly provider.This option is deprecated since Ansible 2.9 and will be removed with the
assertonly provider in Ansible 2.13. For alternatives, see the example on replacing assertonly .aliases: subjectAltName |
|
subject_alt_name_strict
boolean
|
|
If set to
yes , the subject_alt_name extension field must contain only these values.This is only used by the
assertonly provider.This option is deprecated since Ansible 2.9 and will be removed with the
assertonly provider in Ansible 2.13. For alternatives, see the example on replacing assertonly .aliases: subjectAltName_strict |
subject_strict
boolean
added in 2.5 |
|
If set to
yes , the subject field must contain only these values.This is only used by the
assertonly provider.This option is deprecated since Ansible 2.9 and will be removed with the
assertonly provider in Ansible 2.13. For alternatives, see the example on replacing assertonly . |
unsafe_writes
boolean
|
|
Influence when to use atomic operation to prevent data corruption or inconsistent reads from the target file.
By default this module uses atomic operations to prevent data corruption or inconsistent reads from the target files, but sometimes systems are configured or just broken in ways that prevent this. One example is docker mounted files, which cannot be updated atomically from inside the container and can only be written in an unsafe manner.
This option allows Ansible to fall back to unsafe methods of updating files when atomic operations fail (however, it doesn't force Ansible to perform unsafe writes).
IMPORTANT! Unsafe writes are subject to race conditions and can lead to data corruption.
|
valid_at
string
|
The certificate must be valid at this point in time.
The timestamp is formatted as an ASN.1 TIME.
This is only used by the
assertonly provider.This option is deprecated since Ansible 2.9 and will be removed with the
assertonly provider in Ansible 2.13. For alternatives, see the example on replacing assertonly . |
|
valid_in
string
|
The certificate must still be valid at this relative time offset from now.
Valid format is
[+-]timespec | number_of_seconds where timespec can be an integer + [w | d | h | m | s] (e.g. +32w1d2h .Note that if using this parameter, this module is NOT idempotent.
This is only used by the
assertonly provider.This option is deprecated since Ansible 2.9 and will be removed with the
assertonly provider in Ansible 2.13. For alternatives, see the example on replacing assertonly . |
|
version
integer
|
The version of the certificate.
Nowadays it should almost always be 3.
This is only used by the
assertonly provider.This option is deprecated since Ansible 2.9 and will be removed with the
assertonly provider in Ansible 2.13. For alternatives, see the example on replacing assertonly . |
Notes¶
Note
- All ASN.1 TIME values should be specified following the YYYYMMDDHHMMSSZ pattern.
- Date specified should be UTC. Minutes and seconds are mandatory.
- For security reason, when you use
ownca
provider, you should NOT run openssl_certificate on a target machine, but on a dedicated CA machine. It is recommended not to store the CA private key on the target machine. Once signed, the certificate can be moved to the target machine.
See Also¶
See also
- openssl_csr – Generate OpenSSL Certificate Signing Request (CSR)
- The official documentation on the openssl_csr module.
- openssl_dhparam – Generate OpenSSL Diffie-Hellman Parameters
- The official documentation on the openssl_dhparam module.
- openssl_pkcs12 – Generate OpenSSL PKCS#12 archive
- The official documentation on the openssl_pkcs12 module.
- openssl_privatekey – Generate OpenSSL private keys
- The official documentation on the openssl_privatekey module.
- openssl_publickey – Generate an OpenSSL public key from its private key
- The official documentation on the openssl_publickey module.
Examples¶
- name: Generate a Self Signed OpenSSL certificate
openssl_certificate:
path: /etc/ssl/crt/ansible.com.crt
privatekey_path: /etc/ssl/private/ansible.com.pem
csr_path: /etc/ssl/csr/ansible.com.csr
provider: selfsigned
- name: Generate an OpenSSL certificate signed with your own CA certificate
openssl_certificate:
path: /etc/ssl/crt/ansible.com.crt
csr_path: /etc/ssl/csr/ansible.com.csr
ownca_path: /etc/ssl/crt/ansible_CA.crt
ownca_privatekey_path: /etc/ssl/private/ansible_CA.pem
provider: ownca
- name: Generate a Let's Encrypt Certificate
openssl_certificate:
path: /etc/ssl/crt/ansible.com.crt
csr_path: /etc/ssl/csr/ansible.com.csr
provider: acme
acme_accountkey_path: /etc/ssl/private/ansible.com.pem
acme_challenge_path: /etc/ssl/challenges/ansible.com/
- name: Force (re-)generate a new Let's Encrypt Certificate
openssl_certificate:
path: /etc/ssl/crt/ansible.com.crt
csr_path: /etc/ssl/csr/ansible.com.csr
provider: acme
acme_accountkey_path: /etc/ssl/private/ansible.com.pem
acme_challenge_path: /etc/ssl/challenges/ansible.com/
force: yes
- name: Generate an Entrust certificate via the Entrust Certificate Services (ECS) API
openssl_certificate:
path: /etc/ssl/crt/ansible.com.crt
csr_path: /etc/ssl/csr/ansible.com.csr
provider: entrust
entrust_requester_name: Jo Doe
entrust_requester_email: [email protected]
entrust_requester_phone: 555-555-5555
entrust_cert_type: STANDARD_SSL
entrust_api_user: apiusername
entrust_api_key: a^lv*32!cd9LnT
entrust_api_client_cert_path: /etc/ssl/entrust/ecs-client.crt
entrust_api_client_cert_key_path: /etc/ssl/entrust/ecs-key.crt
entrust_api_specification_path: /etc/ssl/entrust/api-docs/cms-api-2.1.0.yaml
# The following example shows one assertonly usage using all existing options for
# assertonly, and shows how to emulate the behavior with the openssl_certificate_info,
# openssl_csr_info, openssl_privatekey_info and assert modules:
- openssl_certificate:
provider: assertonly
path: /etc/ssl/crt/ansible.com.crt
csr_path: /etc/ssl/csr/ansible.com.csr
privatekey_path: /etc/ssl/csr/ansible.com.key
signature_algorithms:
- sha256WithRSAEncryption
- sha512WithRSAEncryption
subject:
commonName: ansible.com
subject_strict: yes
issuer:
commonName: ansible.com
issuer_strict: yes
has_expired: no
version: 3
key_usage:
- Data Encipherment
key_usage_strict: yes
extended_key_usage:
- DVCS
extended_key_usage_strict: yes
subject_alt_name:
- dns:ansible.com
subject_alt_name_strict: yes
not_before: 20190331202428Z
not_after: 20190413202428Z
valid_at: "+1d10h"
invalid_at: 20200331202428Z
valid_in: 10 # in ten seconds
- openssl_certificate_info:
path: /etc/ssl/crt/ansible.com.crt
# for valid_at, invalid_at and valid_in
valid_at:
one_day_ten_hours: "+1d10h"
fixed_timestamp: 20200331202428Z
ten_seconds: "+10"
register: result
- openssl_csr_info:
# Verifies that the CSR signature is valid; module will fail if not
path: /etc/ssl/csr/ansible.com.csr
register: result_csr
- openssl_privatekey_info:
path: /etc/ssl/csr/ansible.com.key
register: result_privatekey
- assert:
that:
# When private key is specified for assertonly, this will be checked:
- result.public_key == result_privatekey.public_key
# When CSR is specified for assertonly, this will be checked:
- result.public_key == result_csr.public_key
- result.subject_ordered == result_csr.subject_ordered
- result.extensions_by_oid == result_csr.extensions_by_oid
# signature_algorithms check
- "result.signature_algorithm == 'sha256WithRSAEncryption' or result.signature_algorithm == 'sha512WithRSAEncryption'"
# subject and subject_strict
- "result.subject.commonName == 'ansible.com'"
- "result.subject | length == 1" # the number must be the number of entries you check for
# issuer and issuer_strict
- "result.issuer.commonName == 'ansible.com'"
- "result.issuer | length == 1" # the number must be the number of entries you check for
# has_expired
- not result.expired
# version
- result.version == 3
# key_usage and key_usage_strict
- "'Data Encipherment' in result.key_usage"
- "result.key_usage | length == 1" # the number must be the number of entries you check for
# extended_key_usage and extended_key_usage_strict
- "'DVCS' in result.extended_key_usage"
- "result.extended_key_usage | length == 1" # the number must be the number of entries you check for
# subject_alt_name and subject_alt_name_strict
- "'dns:ansible.com' in result.subject_alt_name"
- "result.subject_alt_name | length == 1" # the number must be the number of entries you check for
# not_before and not_after
- "result.not_before == '20190331202428Z'"
- "result.not_after == '20190413202428Z'"
# valid_at, invalid_at and valid_in
- "result.valid_at.one_day_ten_hours" # for valid_at
- "not result.valid_at.fixed_timestamp" # for invalid_at
- "result.valid_at.ten_seconds" # for valid_in
# Examples for some checks one could use the assertonly provider for:
# (Please note that assertonly has been deprecated!)
# How to use the assertonly provider to implement and trigger your own custom certificate generation workflow:
- name: Check if a certificate is currently still valid, ignoring failures
openssl_certificate:
path: /etc/ssl/crt/example.com.crt
provider: assertonly
has_expired: no
ignore_errors: yes
register: validity_check
- name: Run custom task(s) to get a new, valid certificate in case the initial check failed
command: superspecialSSL recreate /etc/ssl/crt/example.com.crt
when: validity_check.failed
- name: Check the new certificate again for validity with the same parameters, this time failing the play if it is still invalid
openssl_certificate:
path: /etc/ssl/crt/example.com.crt
provider: assertonly
has_expired: no
when: validity_check.failed
# Some other checks that assertonly could be used for:
- name: Verify that an existing certificate was issued by the Let's Encrypt CA and is currently still valid
openssl_certificate:
path: /etc/ssl/crt/example.com.crt
provider: assertonly
issuer:
O: Let's Encrypt
has_expired: no
- name: Ensure that a certificate uses a modern signature algorithm (no SHA1, MD5 or DSA)
openssl_certificate:
path: /etc/ssl/crt/example.com.crt
provider: assertonly
signature_algorithms:
- sha224WithRSAEncryption
- sha256WithRSAEncryption
- sha384WithRSAEncryption
- sha512WithRSAEncryption
- sha224WithECDSAEncryption
- sha256WithECDSAEncryption
- sha384WithECDSAEncryption
- sha512WithECDSAEncryption
- name: Ensure that the existing certificate belongs to the specified private key
openssl_certificate:
path: /etc/ssl/crt/example.com.crt
privatekey_path: /etc/ssl/private/example.com.pem
provider: assertonly
- name: Ensure that the existing certificate is still valid at the winter solstice 2017
openssl_certificate:
path: /etc/ssl/crt/example.com.crt
provider: assertonly
valid_at: 20171221162800Z
- name: Ensure that the existing certificate is still valid 2 weeks (1209600 seconds) from now
openssl_certificate:
path: /etc/ssl/crt/example.com.crt
provider: assertonly
valid_in: 1209600
- name: Ensure that the existing certificate is only used for digital signatures and encrypting other keys
openssl_certificate:
path: /etc/ssl/crt/example.com.crt
provider: assertonly
key_usage:
- digitalSignature
- keyEncipherment
key_usage_strict: true
- name: Ensure that the existing certificate can be used for client authentication
openssl_certificate:
path: /etc/ssl/crt/example.com.crt
provider: assertonly
extended_key_usage:
- clientAuth
- name: Ensure that the existing certificate can only be used for client authentication and time stamping
openssl_certificate:
path: /etc/ssl/crt/example.com.crt
provider: assertonly
extended_key_usage:
- clientAuth
- 1.3.6.1.5.5.7.3.8
extended_key_usage_strict: true
- name: Ensure that the existing certificate has a certain domain in its subjectAltName
openssl_certificate:
path: /etc/ssl/crt/example.com.crt
provider: assertonly
subject_alt_name:
- www.example.com
- test.example.com
Return Values¶
Common return values are documented here, the following are the fields unique to this module:
Status¶
- This module is not guaranteed to have a backwards compatible interface. [preview]
- This module is maintained by the Ansible Community. [community]
Authors¶
- Yanis Guenane (@Spredzy)
- Markus Teufelberger (@MarkusTeufelberger)
Hint
If you notice any issues in this documentation, you can edit this document to improve it.