dellemc.enterprise_sonic.sonic_l2_acls module – Manage Layer 2 access control lists (ACL) configurations on SONiC

Note

This module is part of the dellemc.enterprise_sonic collection (version 2.5.1).

You might already have this collection installed if you are using the ansible package. It is not included in ansible-core. To check whether it is installed, run ansible-galaxy collection list.

To install it, use: ansible-galaxy collection install dellemc.enterprise_sonic.

To use it in a playbook, specify: dellemc.enterprise_sonic.sonic_l2_acls.

New in dellemc.enterprise_sonic 2.1.0

Synopsis 

This module provides configuration management of Layer 2 access control lists (ACL) in devices running SONiC.

Parameters 

Parameter	Comments
config list / elements=dictionary	Specifies Layer 2 ACL configurations.
name string / required	Specifies the ACL name.
remark string	Specifies remark for the ACL.
rules list / elements=dictionary	List of rules with the ACL. sequence_num, action, source & destination are required for adding a new rule. If state=deleted, options other than sequence_num are not considered. ethertype and vlan_tag_format are mutually exclusive.
action string	Specifies the action taken on the matched Ethernet frame. Choices: `"deny"` `"discard"` `"do-not-nat"` `"permit"` `"transit"`
dei integer	Match Ethernet frame with the given Drop Eligible Indicator (DEI) value. Choices: `0` `1`
destination dictionary	Specifies the destination of the Ethernet frame. address and address_mask are required together. any, host and address are mutually exclusive.
address string	Destination MAC address.
address_mask string	Destination MAC address mask.
any boolean	Match any destination MAC address. Choices: `false` `true`
host string	MAC address of a single destination host.
ethertype dictionary	Specifies the EtherType of the Ethernet frame. Only one suboption can be specified for ethertype in a rule.
arp boolean	Match Ethernet frame with ARP EtherType (0x806). Choices: `false` `true`
ipv4 boolean	Match Ethernet frame with IPv4 EtherType (0x800). Choices: `false` `true`
ipv6 boolean	Match Ethernet frame with IPv6 EtherType (0x86DD). Choices: `false` `true`
value string	Specifies the EtherType value to match as a hexadecimal string. The range is from 0x600 to 0xffff.
pcp dictionary	Match Ethernet frames using Priority Code Point (PCP) value. mask is valid only when value is specified. value and traffic_type are mutually exclusive.
mask integer	Match Ethernet frame with given PCP value and mask. The range is from 0 to 7.
traffic_type string	Match Ethernet frame with PCP value for the given traffic type. `be` - Match Ethernet frame with Best effort PCP (0). `bk` - Match Ethernet frame with Background PCP (1). `ee` - Match Ethernet frame with Excellent effort PCP (2). `ca` - Match Ethernet frame with Critical applications PCP (3). `vi` - Match Ethernet frame with Video, < 100 ms latency and jitter PCP (4). `vo` - Match Ethernet frame with Voice, < 10 ms latency and jitter PCP (5). `ic` - Match Ethernet frame with Internetwork control PCP (6). `nc` - Match Ethernet frame with Network control PCP (7). Choices: `"be"` `"bk"` `"ee"` `"ca"` `"vi"` `"vo"` `"ic"` `"nc"`
value integer	Match Ethernet frame with the given PCP value. The range is from 0 to 7
remark string	Specifies remark for the ACL rule.
sequence_num integer / required	Specifies the sequence number of the rule. The range is from 1 to 65535.
source dictionary	Specifies the source of the Ethernet frame. address and address_mask are required together. any, host and address are mutually exclusive.
address string	Source MAC address.
address_mask string	Source MAC address mask.
any boolean	Match any source MAC address. Choices: `false` `true`
host string	MAC address of a single source host.
vlan_id integer	Match Ethernet frame with the given VLAN ID.
vlan_tag_format dictionary	Match Ethernet frame with the given VLAN tag format.
multi_tagged boolean	Match three of more VLAN tagged Ethernet frame. Choices: `false` `true`
state string	The state of the configuration after module completion. `merged` - Merges provided L2 ACL configuration with on-device configuration. `replaced` - Replaces on-device configuration of the specified L2 ACLs with provided configuration. `overridden` - Overrides all on-device L2 ACL configurations with the provided configuration. `deleted` - Deletes on-device L2 ACL configuration. Choices: `"merged"` ← (default) `"replaced"` `"overridden"` `"deleted"`

Notes 

Note

Supports check_mode.

Examples 

# Using merged
#
# Before State:
# -------------
#
# sonic# show running-configuration mac access-list
# !
# mac access-list test
#  seq 1 permit host 22:22:22:22:22:22 any vlan 20
# sonic#

  - name: Merge provided Layer 2 ACL configurations
    dellemc.enterprise_sonic.sonic_l2_acls:
      config:
        - name: 'test'
          rules:
            - sequence_num: 2
              action: 'permit'
              source:
                any: true
              destination:
                any: true
              ethertype:
                value: '0x88cc'
              remark: 'LLDP'
            - sequence_num: 3
              action: 'permit'
              source:
                any: true
              destination:
                address: '00:00:10:00:00:00'
                address_mask: '00:00:ff:ff:00:00'
              pcp:
                value: 4
                mask: 6
            - sequence_num: 4
              action: 'deny'
              source:
                any: true
              destination:
                any: true
              vlan_tag_format:
                multi_tagged: true
        - name: 'test1'
          remark: 'test_mac_acl'
          rules:
            - sequence_num: 1
              action: 'permit'
              source:
                host: '11:11:11:11:11:11'
              destination:
                any: true
            - sequence_num: 2
              action: 'permit'
              source:
                any: true
              destination:
                any: true
              ethertype:
                arp: true
              vlan_id: 100
            - sequence_num: 3
              action: 'deny'
              source:
                any: true
              destination:
                any: true
              dei: 0
      state: merged

# After State:
# ------------
#
# sonic# show running-configuration mac access-list
# !
# mac access-list test
#  seq 1 permit host 22:22:22:22:22:22 any vlan 20
#  seq 2 permit any any 0x88cc remark LLDP
#  seq 3 permit any 00:00:10:00:00:00 00:00:ff:ff:00:00 pcp vi pcp-mask 6
#  seq 4 deny any any vlan-tag-format multi-tagged
# !
# mac access-list test1
#  remark test_mac_acl
#  seq 1 permit host 11:11:11:11:11:11 any
#  seq 2 permit any any arp vlan 100
#  seq 3 deny any any dei 0
# sonic#


# Using replaced
#
# Before State:
# -------------
#
# sonic# show running-configuration mac access-list
# !
# mac access-list test
#  seq 1 permit host 22:22:22:22:22:22 any vlan 20
#  seq 2 permit any any 0x88cc remark LLDP
#  seq 3 permit any 00:00:10:00:00:00 00:00:ff:ff:00:00 pcp vi pcp-mask 6
# !
# mac access-list test1
#  remark test_mac_acl
#  seq 1 permit host 11:11:11:11:11:11 any
#  seq 2 permit any any arp vlan 100
#  seq 3 deny any any dei 0
# sonic#

  - name: Replace device configuration of specified Layer 2 ACLs with provided configuration
    dellemc.enterprise_sonic.sonic_l2_acls:
      config:
        - name: 'test1'
          rules:
            - sequence_num: 1
              action: 'permit'
              source:
                any: true
              destination:
                any: true
              ethertype:
                arp: true
              vlan_id: 200
            - sequence_num: 2
              action: 'discard'
              source:
                any: true
              destination:
                any: true
        - name: 'test2'
          rules:
            - sequence_num: 1
              action: 'permit'
              source:
                host: '33:33:33:33:33:33'
              destination:
                host: '44:44:44:44:44:44'
      state: replaced

# After State:
# ------------
#
# sonic# show running-configuration mac access-list
# !
# mac access-list test
#  seq 1 permit host 22:22:22:22:22:22 any vlan 20
#  seq 2 permit any any 0x88cc remark LLDP
#  seq 3 permit any 00:00:10:00:00:00 00:00:ff:ff:00:00 pcp vi pcp-mask 6
# !
# mac access-list test1
#  seq 1 permit any any arp vlan 200
#  seq 2 discard any any
# !
# mac access-list test2
#  seq 1 permit host 33:33:33:33:33:33 host 44:44:44:44:44:44
# sonic#


# Using overridden
#
# Before State:
# -------------
#
# sonic# show running-configuration mac access-list
# !
# mac access-list test
#  seq 1 permit host 22:22:22:22:22:22 any vlan 20
#  seq 2 permit any any 0x88cc remark LLDP
#  seq 3 permit any 00:00:10:00:00:00 00:00:ff:ff:00:00 pcp vi pcp-mask 6
# !
# mac access-list test1
#  seq 1 permit any any arp vlan 200
#  seq 2 discard any any
# !
# mac access-list test2
#  seq 1 permit host 33:33:33:33:33:33 host 44:44:44:44:44:44
# sonic#

  - name: Override device configuration of all Layer 2 ACLs with provided configuration
    dellemc.enterprise_sonic.sonic_l2_acls:
      config:
        - name: 'test1'
          remark: 'test_mac_acl'
          rules:
            - sequence_num: 1
              action: 'permit'
              source:
                host: '11:11:11:11:11:11'
              destination:
                any: true
              vlan_id: 100
            - sequence_num: 2
              action: 'permit'
              source:
                any: true
              destination:
                any: true
              pcp:
                traffic_type: 'ca'
            - sequence_num: 3
              action: 'deny'
              source:
                any: true
              destination:
                any: true
              ethertype:
                ipv4: true
      state: overridden

# After State:
# ------------
#
# sonic# show running-configuration mac access-list
# !
# mac access-list test1
#  remark test_mac_acl
#  seq 1 permit host 11:11:11:11:11:11 any vlan 100
#  seq 2 permit any any pcp ca
#  seq 3 deny any any ip
# sonic#


# Using deleted
#
# Before State:
# -------------
#
# sonic# show running-configuration mac access-list
# !
# mac access-list test
#  seq 1 permit host 22:22:22:22:22:22 any vlan 20
#  seq 2 permit any any 0x88cc remark LLDP
#  seq 3 permit any 00:00:10:00:00:00 00:00:ff:ff:00:00 pcp vi pcp-mask 6
# !
# mac access-list test1
#  remark test_mac_acl
#  seq 1 permit host 11:11:11:11:11:11 any vlan 100
#  seq 2 deny any any ip
# !
# mac access-list test2
#  seq 1 permit host 33:33:33:33:33:33 host 44:44:44:44:44:44
# sonic#

  - name: Delete specified Layer 2 ACLs, ACL remark and ACL rule entries
    dellemc.enterprise_sonic.sonic_l2_acls:
      config:
        - name: 'test'
          rules:
            - sequence_num: 3
        - name: 'test1'
          remark: 'test_mac_acl'
        - name: 'test2'
      state: deleted

# After State:
# ------------
#
# sonic# show running-configuration mac access-list
# !
# mac access-list test
#  seq 1 permit host 22:22:22:22:22:22 any vlan 20
#  seq 2 permit any any 0x88cc remark LLDP
# !
# mac access-list test1
#  seq 1 permit host 11:11:11:11:11:11 any vlan 100
#  seq 2 deny any any ip
# sonic#


# Using deleted
#
# Before State:
# -------------
#
# sonic# show running-configuration mac access-list
# !
# mac access-list test
#  seq 1 permit host 22:22:22:22:22:22 any vlan 20
#  seq 2 permit any any 0x88cc remark LLDP
#  seq 3 permit any 00:00:10:00:00:00 00:00:ff:ff:00:00 pcp vi pcp-mask 6
# !
# mac access-list test1
#  remark test_mac_acl
#  seq 1 permit host 11:11:11:11:11:11 any vlan 100
#  seq 2 deny any any ip
# !
# mac access-list test2
#  seq 1 permit host 33:33:33:33:33:33 host 44:44:44:44:44:44
# sonic#

  - name: Delete all Layer 2 ACL configurations
    dellemc.enterprise_sonic.sonic_l2_acls:
      config:
      state: deleted

# After State:
# ------------
#
# sonic# show running-configuration mac access-list
# sonic#

Return Values 

Common return values are documented here, the following are the fields unique to this module:

Key	Description
after list / elements=string	The resulting configuration module invocation. Returned: when changed Sample: `["The configuration returned will always be in the same format as the parameters above.\n"]`
after(generated) list / elements=string	The generated configuration module invocation. Returned: when `check_mode` Sample: `["The configuration returned will always be in the same format as the parameters above.\n"]`
before list / elements=string	The configuration prior to the module invocation. Returned: always Sample: `["The configuration returned will always be in the same format as the parameters above.\n"]`
commands list / elements=string	The set of commands pushed to the remote device. Returned: always Sample: `["command 1", "command 2", "command 3"]`

Authors

Arun Saravanan Balachandran (@ArunSaravananBalachandran)

dellemc.enterprise_sonic.sonic_l2_acls module – Manage Layer 2 access control lists (ACL) configurations on SONiC

Synopsis

Parameters

Notes

Examples

Return Values