dellemc.openmanage.idrac_boot role – Configure the boot order settings
Note
This role is part of the dellemc.openmanage collection (version 9.8.0).
You might already have this collection installed if you are using the ansible
package.
It is not included in ansible-core
.
To check whether it is installed, run ansible-galaxy collection list
.
To install it use: ansible-galaxy collection install dellemc.openmanage
.
To use it in a playbook, specify: dellemc.openmanage.idrac_boot
.
Entry point main
– Configure the boot order settings
New in dellemc.openmanage 8.0.0
Synopsis
This role allows to configure the boot order settings.
Parameters
Parameter |
Comments |
---|---|
Options to enable or disable the boot devices. This is mutually exclusive with boot_order, boot_source_override_mode, boot_source_override_enabled, boot_source_override_target, and uefi_target_boot_source_override. |
|
FQDD of the boot device. This is mutually exclusive with display_name. |
|
Display name of the boot source device. This is mutually exclusive with boot_option_reference. |
|
Enable or disable the boot device. Choices:
|
|
This option allows to set the boot devices in the required boot order sequence. This is mutually exclusive with boot_options. |
|
The state of the Boot Source Override feature.
The state is set to Changes to these options do not alter the BIOS persistent boot order configuration. This is mutually exclusive with boot_options. Choices:
|
|
The BIOS boot mode (either Legacy or UEFI) to be used when boot_source_override_target boot source is booted.
This is mutually exclusive with boot_options. Choices:
|
|
The boot source override targets the device to use during the next boot instead of the normal boot device.
Changes to these options do not alter the BIOS persistent boot order configuration. This is mutually exclusive with boot_options. Choices:
|
|
The Privacy Enhanced Mail (PEM) file that contains a CA certificate to be used for the validation. |
|
iDRAC IP Address. |
|
iDRAC port. Default: |
|
The socket level timeout in seconds. Default: |
|
Provides the option to wait for job completion. This is applicable when reset_type is Choices:
|
|
The maximum wait time of job_wait in seconds. The job is tracked only for this duration. This option is applicable when job_wait is Default: |
|
iDRAC user password. |
|
Choices:
|
|
Redfish ID of the resource. |
|
The UEFI device path of the device from which to boot when boot_source_override_target is If boot_source_override_target is set to Changes to these options do not alter the BIOS persistent boot order configuration. This is required if boot_source_override_target is This is mutually exclusive with boot_options. |
|
iDRAC username. |
|
If Configure Choices:
|