dellemc.openmanage.ome_configuration_compliance_info – Device compliance report for devices managed in OpenManage Enterprise

Note

This plugin is part of the dellemc.openmanage collection (version 3.6.0).

To install it use: ansible-galaxy collection install dellemc.openmanage.

To use it in a playbook, specify: dellemc.openmanage.ome_configuration_compliance_info.

New in version 3.2.0: of dellemc.openmanage

Synopsis

  • This module allows the generation of a compliance report of a specific or all of devices in a configuration compliance baseline.

Requirements

The below requirements are needed on the host that executes this module.

  • python >= 2.7.5

Parameters

Parameter Choices/Defaults Comments
baseline
string / required
The name of the created baseline.
A compliance report is generated even when the template is not associated with the baseline.
device_id
integer
The ID of the target device which is associated with the baseline.
device_service_tag
string
The device service tag of the target device associated with the baseline.
device_service_tag is mutually exclusive with device_id.
hostname
string / required
OpenManage Enterprise IP address or hostname.
password
string / required
OpenManage Enterprise password.
port
integer
Default:
443
OpenManage Enterprise HTTPS port.
username
string / required
OpenManage Enterprise username.

Notes

Note

  • Run this module from a system that has direct access to DellEMC OpenManage Enterprise.

  • This module supports check_mode.

Examples

---
- name: Retrieve the compliance report of all of the devices in the specified configuration compliance baseline.
  dellemc.openmanage.ome_configuration_compliance_info:
    hostname: "192.168.0.1"
    username: "username"
    password: "password"
    baseline: baseline_name

- name: Retrieve the compliance report for a specific device associated with the baseline using the device ID.
  dellemc.openmanage.ome_configuration_compliance_info:
    hostname: "192.168.0.1"
    username: "username"
    password: "password"
    baseline: baseline_name
    device_id: 10001

- name: Retrieve the compliance report for a specific device associated with the baseline using the device service tag.
  dellemc.openmanage.ome_configuration_compliance_info:
    hostname: "192.168.0.1"
    username: "username"
    password: "password"
    baseline: baseline_name
    device_service_tag: 2HFGH3

Return Values

Common return values are documented here, the following are the fields unique to this module:

Key Returned Description
compliance_info
dictionary
success
Returns the compliance report information.

Sample:
[{'ComplianceAttributeGroups': [{'Attributes': [], 'ComplianceReason': 'One or more attributes on the target device(s) does not match the compliance template.', 'ComplianceStatus': 2, 'ComplianceSubAttributeGroups': [{'Attributes': [{'AttributeId': 75369, 'ComplianceReason': 'Attribute has different value from template', 'ComplianceStatus': 3, 'CustomId': 0, 'Description': None, 'DisplayName': 'Workload Profile', 'ExpectedValue': 'HpcProfile', 'Value': 'NotAvailable'}], 'ComplianceReason': 'One or more attributes on the target device(s) does not match the compliance template.', 'ComplianceStatus': 2, 'ComplianceSubAttributeGroups': [], 'DisplayName': 'System Profile Settings', 'GroupNameId': 1}], 'DisplayName': 'BIOS', 'GroupNameId': 1}], 'ComplianceStatus': 'NONCOMPLIANT', 'DeviceName': 'WIN-PLOV8MPIP40', 'DeviceType': 1000, 'Id': 25011, 'InventoryTime': '2021-03-18 00:01:57.809771', 'Model': 'PowerEdge R7525', 'ServiceTag': 'JHMBX53'}]
error_info
dictionary
on HTTP error
Details of the HTTP Error.

Sample:
{'error': {'@Message.ExtendedInfo': [{'Message': 'Unable to process the request because an error occurred.', 'MessageArgs': [], 'MessageId': 'GEN1234', 'RelatedProperties': [], 'Resolution': 'Retry the operation. If the issue persists, contact your system administrator.', 'Severity': 'Critical'}], 'code': 'Base.1.0.GeneralError', 'message': 'A general error has occurred. See ExtendedInfo for more information.'}}
msg
string
on error
Over all compliance report status.

Sample:
Unable to complete the operation because the entered target baseline name 'baseline' is invalid.


Authors

  • Felix Stephen A (@felixs88)